steel 3d welding table with accessory

3D Welding table:

This welding table has five working surfaces, i.e. its front and four sides.The locating piece can be installed on any of its five working surfaces. Also, the welding table can be extended via any of its five working surfaces.

• There are steel welding tables or casting welding tables in terms of its materials of 3D welding tables. 
• There are mainly D28 series and D16 series in terms of hole diameter of 3D working tables. D28 series has the hole diameter at 28mm, and distance between groove lines on surface is 100*100mm. D16 series has the hole diameter at 16mm, and distance between groove lines on surface is 50*50mm.

2D Welding table:

This welding table has its front as working surface and its sides as reinforcing ribs. The locating piece can be installed on its front. Also, the welding table can be extended to make up a 3D welding table via its front.

• There are steel welding tables in terms of its materials of 2D welding tables. 
• There are mainly D28 series and D16 series in terms of hole diameter of 2D working tables. D28 series has the hole diameter at 28mm, and distance between groove lines on surface is 100*100mm. D16 series has the hole diameter at 16mm, and distance between groove lines on surface is

3d welding table accessory

Question 1:when you do the solution for customers, what information needed to beprovided from customers?

Answer: Customer need provide picture of the item which need to be soldered, and provide welding procedure and welding position as detailed as you can. Of course, in order to more accurate solution, we hope customer can provide 3D electronic file, it is better with “step” format, or 2D file, and then, Santuo will suggest a solution which need what kind of fixtures and jigs and how many per item to customer, after customer’s /confirm/iation, Santuo can do the quotation for the whole set of solution list.

Question 2: what are daily maintenance for the Welding table, or if any prevention measures?

Answers:

A. If often use, it is better spray splash liquid onto the welding table.

B. If not often use, it is better spray anti-rust oil.

C. Usually clean up the welding slag and dust on the table.

D. Don’t arc striking on the welding table and avoid damaging it.

E. Don’t watering on the welding table.

Question 3:what is the difference between casting welding table and steel welding table?

Answers:

A. Casting welding table is a casting mould as a whole, it has a good stability; Steel welding table is soldered forming,stability is inferior to the casting.

B. The casting welding table is heavier than steel and higher cost .

C. For prevent welding slag, casting welding table is better than steel, and also rarely stick welding slag.

 1) Professional Free Design;

2) Customized requirements;

3) Low Minimum Order Quantity;

4) Fast delivery; 

We also have other tools for your choice:

cast iron T slot  work plate

granite surface plate

adjust wedged iron pad

casting parts

Contact Information:

May Zhang

E-mail:info#.com

Whatsapp:0086

Wechat/skype: