Product Description

          Mortar spraying machine and grouting machine suitable for: indoor and outdoor ceiling spray, expansion joints leaking, sinking leaking, subway leakage, tunnel leakage, mine plugging, air defense plugging works, dam leakage plugging, floor, cracks, Drum reinforcement, cement mortar spraying, dry mortar spraying, waterproof grouting and waterproof surface coating, waterproof spraying, grouting, ceiling spray, wall spraying, paint spraying, garden spraying, relief effect paint spraying, handicraft spraying, latex paint Paint, rockery spray, sculpture spray can be, sound-absorbing material spray.

Product Operation:

1. Turn on the power, press the button, the screw pump that is working. If you turn the reverse, press the stop button to stop.

2. In the delivery hose into the injection of a small amount of water, or with a screw pump water wet delivery hose, and then the tube of water gradually discharged from the export. Drainage should be clean, the tube shall not be retained

3. Connect the duct to the mortar tube side by side. The air duct is connected to the gun.

4. Stir the material into the hopper (can be used with the powder machine).

5. Press the start button to start the shot. In the work, combined with the regulation of air volume, can make the best spray quality.

6. Adjustable speed of the screw pump, the output flow of 0-8 liters / min, at work, as long as the return to adjust the requirements to the construction requirements of the output speed can be.

7. The mixing material must be continuously added in the hopper to ensure the continuity of the spray.

Spray work to be suspended, press the stop button can be, can make the operation more convenient, you can use the following methods for remote control: the middle of the box to the left is the manual control switch.

8. Spray work before the end of the hopper to be left after the material spray, close the air pump, after the shutdown.

9. Remove the gun and remove the parts one by one clean.

10. In the hopper into the water, press the pump to clean the pump. When the nozzle flows out of the clear water, press the button to stop, remove the delivery hose and roll up

Construction Site

Newest Products

We will update new products, if had any interested, just notice this part.

Packaging & Shipping

1. Testing Machine before package

2. Package : Inside plastic bag, outside wooden case. 

3. Shipping: By sea, By air.

    By sea: if customer not urgently the machine, we advice by sea, even though by sea took time is long, but by sea reduce much money about the freight, and it is good for customer if the machine is heavy and big size.

    By air: it is faster than by sea, but its freight is higher much than by sea, so this kind of type always suggest for light, small size and urgently demand machine.

Pre-sale service
1.Related machines’s technical parameter will be supplied to customer.
2.According to customer’s factory size, factory layout can be provided in advance.

3. According to customer’s material cost, general formulation can be prepared well.
4.Special machine can be supplied as customer’s request.
5.Professional Advice about Market, machines, processing , materials, packing can be supplied
 6. Suggesting professional ship agent or helping book ship as customer request. 

 After sale service:

1.Allocation chart as the buyer’s request will be supplied. 
2.Operation manual will be supplied after shipment.
3.One year warrantee, life time maintenance with cost price.
4.Free easy broken spare parts will be sent with container .
5.First installation can be done by engineer.
6.Training workers in customer’s factory.

If you had any problem, just feel free to contact with us.

Any time, we will reply you as soon as possible!