LAUNDRY AND CLEANING

1: Make clothes soft,not fade

2: Reduce the dosage of detergent

EQUIPMENT MAINTENANCE

1: Reduce water hardness,avoid the production scale

2: Reduce energy consumption,increase 30% in water heater efficiency

BATHE

1: Make skin smooth and soft,keep natural shine

2: Delay skin aging,skin not easy to wrinkle for prolonged use the sater softener 

Components:

Automatic Control Valve

1: Noryl plastic approved by FDA

2: Strong corrosion resistance;stainless

3: Innovative design;refined structure

FRP Vessel

1: Polyethene material manufactured for the food & beverage industries

2: Light;high pressure resistance

3: Strong corrosion resistance;stainless

Media

High-grade Anion Exchange Resion(Food Grade)

Brine Valve

1: Resonable structure,safe and reliable

2: high pressure resistance

Functions & Features

1): Automatic valve Control

   1: 24 hours control and monitoring with a timer;automatically regenerate the medial bed

      at the  system's set time of  regeneration according to the set regeneration frequency

   2: Automatically calculate and design more scientific cycle plan according to the quality

      of  supply water and the user's actual  water use

   3: Cycle process:

        IN SERV.: Supply water with suitable pressure and flow rate flows into softener,and

                     the cations concerns to  water hardness( Ca²⁺ , Mg2+ ,etc.)in the water will

                     be replaced by Na+  in  regenerants,then  the  softening system supply

                     softed water  through its outlet.  

       Backwash: When the ion exchange resins are out of effect,the resin bed needs to

                        be regenerated.And before the regeneration of resin,a backwash step is   

                       absolutely necessarily for two main purposes:remove the residuals and 

                       resin shatters in the resin bed,and loose the impacted bed for a better

                       regeneration efficiency.

       Brine: Under certain concentration and flow rate conditions,brine flow through entire

                  resin bed,then the saturated resins will resume their softening capacity.

       Rinse: Rinse the resin bed to remove the residual regenerant(salt) in it after Brine

                 step until the water from outlet contains no regenerant:rinse could also impact

                 the resin bed for a better softening effect.

       Fill: Refill water to brine tank to dissolve salt for the next regeneration.

2):PE brine tank

      Refill water and salt meet each other in the brine tank,and the salt will 

      dissolve continuously to water through natural convection until the water

      is saturated by salts.

The following photos are LX1 H0835,for reference

Best choice for family use