Asterisk Analog card TDM410EL PCI-E 4 FXO/FXS 2U compatible with DIGIUM

Introduction

The TDM410E is a four-wire PCI-E Asterisk analog voice card that provides the ability to connect analog phone and PSTN lines, supporting four-channel FXO/ FXScombinations.

In the Asterisk environment, TDM410E can bring high-quality voice call quality and telephone system applications to the communication system and support a comprehensive protocol processing. It is installed on the Linux-based operating system, and fully open to developers, so that developers in this platform can do secondary development, then can provide more value-added business.

Main Features

1. TDM410E is four-wire analog voice card, supports four FXO or FXS, and FXO and FXS can be matched in any way, and the red module is FXO, green module is FXS.

2. Based on PCI-E 1X, compatible with 2X, 4X, 8X and 16X.

3. Universal in the world: Configurable line interface meet the requirements of analog circuits around the world.

4. The driver layer is fully compatible with Asterisk card, enjoying open source's security and stability.

5. No additional drivers are required to avoid potential risks. Completely use DAHDI / Zaptel driver comes with Asterisk card (wctdm24xxp driver, no need to install any patch).

6. Support Linux, BSD, CentOS, openSUSE, Fedora, Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD operating system.

7. TDM410E is based on DMA data reading and writing technology to support fast data transmission, significantly decreasing the occupancy rate of the computer CPU.

8. Support A-Law, μ-Law, G.729, G.723, GSM, Speex, ADPCM format code.

9. Support  Asterisk®, Elastix®, FreeSWITCH ™, PBX in a Flash, trixbox®, Yate ™ ,IPPBX / IVR and a variety of open source software applications.

10. Natural IP architecture, no need for IP voice card, it can build VoIP communication equipment, and use IP network to provide cross-network communication services.

Technical Specification

1. Support randomly combinations of 4 FXO / FXS modules for single card.

2. Support 4-way RJ11 interfaces.

3. Based on PCI-E 1X, compatible with 2X, 4X, 8X and 16X.

4. High stability of the firmware output / input.

5. Power consumption: the minimum is 2.93W, the maximum is 9.17W.

6. Working environment temperature: 0 - 50 ℃.

7. Storage environment temperature: -40 - 125 °C.

8. Packaging size: 230mmx140mmx40mm.

9. Package weight: 0.2kg

Suitable operation system

Linux OS(all versions and distributions above 1.0 or 1.0).

System hardware minimum configuration

CPU: 800-Mhz Pentium III

Memory: 128Mb

Available PCI-E slots