The products use 4 pieces #5 AA dry battery to supply power, receiver boxes put beside the fireworks products, each receiverbox can ignite 2-5 pieces ignite at the same time in series. It can fire both electrical match and power match. The distance of the remote is about 100 meters.

Usage Introduction:

1. Put 4 pcs of dry battery into the battery box, and turn on the switch, the red and yellow light will be bright and the brightness will the same, if not, it means there is something wrong with the receivers, and then press the button of the remote, the yellow light will be extinguish and the red light will be more bright than before, it means the remote and the receive is normal.

2.put the product connect with the receiver, if the red light will be extinguish and the yellow light will be more bright than before ,it means the product is normal

3. After you connect the product with the receivers well, press the button of the relative remote to make the product firing

4. set the control number by the remote (do not connect the product) :Find the little hole in the back side of the receiver box, take a small stick into the hole to press it, the red and yellow light will be flickered , press the button of the remote(for example NO.3),take out the stick first, and then relax the remote ,then setting the control number succeed, now this receiver is controlled by NO.3,other key cannot control this receiver. When do this, you can use one key to control more receivers.