Fiber Optic Mechanical Connector

Optic Mechanical Connector Description                                             

Optical Fiber Fast Connector/OpticalFiber Mechanical Connector, Insertion Loss≤0.3dB, Return Loss≥50dB,SC/UPC TypeConnector, suitable for FTTH drop cable.

Optic Mechanical Connector Analysis Specification                           

Optic Mechanical Connector Operating Steps:                                    

Note:following steps must ensure the cleanliness of product and fiber.

1. Remove theparts and arrange them innoal row.
2. Penetrate the screw cap through the covered wire cable
3. Striped the covered wire,stripped length 50mm
4. Strip fiber coating,keep 21mm
5. Cut out the excess fiber
6. Fiber length after cut out::21mm
7. Penetrate the fiber,let it a bit bending.
8. Keep fiber bending,and lock the lock catch.
9. Put down tail clip,tighten srew cap,and install the housing

Optic Mechanical Connector Re-open:                                                 

  1.Remove the housing,pull down lock catch

  2.Pull down screw cap.pull out the covered wire,and re-assembly.

If any problem during assembly process,please contact us!

Optic Mechanical Connector  Picture: