gypsum block production line
Capacity/M2 | Specification /mm | Shaping Number(piece)/time | Shaping time/hour |
length | Height | thickness |
100,000 | 666mm | 500mm | (80-230mm) | 8 | 5-7 |
120,000 | 10 | 5-7 |
150,000 | 12 | 5-7 |
200,000 | 16 | 5-7 |
250,000 | 18 | 5-7 |
300,000 | 21 | 5-7 |
350,000 | 24 | 5-7 |
1. The specification of the gypsum block
500 mm × 666mm ×60mm
500 mm × 666mm × 80mm
500 mm × 666mm × 100mm (solid, hollow) Hollow rate: 32%
2.The performance of the gypsum block(JC/T 698-1998 gypsum block)
Air noise prevention: 40.5 dB FRP Properties: 186 min Formation: ≤ 0.5 mm/m2 Fracture load: ≥ 4.0 Kn
3. The quality of the gypsum block
It can meet or exceed the "Gypsum block" standards requirements (JC / T 698-1998)
Production Automatic Controlling System
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.
Gypsum Block Introduction:
Gypsum is the main raw material of gypsum block, after mixing with water, then pour the slurry into shaper, after drying and then make light of the building gypsum products. You also can add the lightweight aggregate, fiber reinforced materials, foam and other supporting material in the production according to the performance requirements.
Gypsum Block Characteristics:
1. Gypsum block with light, precise size
2. Fireproof, thermal insulation, regulating indoor humidity
3. Excellent performance of the convenience
4. It is environmental protection, energy conservation, green product
Gypsum Block Application:
1. If uses frame and fixed structure, the wall can bear heavier loads, such as water heater etc.
2. The gypsum block can be used in the bathroom, toilet
Gypsum Block Specification
1. Length 666mm; High 500mm; Thickness 60mm-230mm
2. Three gypsum blocks are 1M2
Production Automatic Controlling System
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency
