General description

Tanso overload safety devices incorporate torque limiters for dependable overload protection. When a jam-up or excessive loading occurs, the built-in torque limiter will reliably and quickly release to prevent system damage. The torque limiter is tamper-proof. once installed, the torque value cannot be changed. This feature ensures the integrity of the machined design, and renders costly and potentially risky calibration procedures unnecessary. Torque value is controlled by the part number that is ordered; that value determines what spring is used during assembly of the torque limiter.

1.Torque values can be changed in the field, however, the torque limiter must be disassembled and the springs replaced to achieve the new torque value.

2.Standard products are bidirectional. Torque value remains the same regardless of rotation. If specified, the torque limiter can be configured at the factory to release at different torque ratings for different rotational directions.

3.When used as a coupling, torque limiter fulfills two functions: 1) A flexible shaft coupling; 2) a mechanical torque limiter.

4.In the shaft-to-shaft configuration, torque limiter can accommodate angular shaft misalignment up to 1.5° and parallel misalignments from 0.005” to 0.015”.

5.The enclosed design of the mechanical torque limiter enables it to operate in a wide variety of industrial environments. Special designs and materials can be used to withstand even the most adverse conditions.

6.Every Tanso torque limiter is made from durable heat treated steel for a long operational life.

7.For more information on Zero-Max’s mechanical torque limiter overload safety devices, contact us.

How it works

The torque value of a Tanso torque limiter is determined by the force of the springs that are installed in the unit. The spring force acts upon slides that are part of the inner shaft; these slides transmit force that holds the drive key in its engagement slot in the outer housing.

When the torque load exceeds the rating of its precision tempered torque springs, the drive key pivots out of the engagement slot to disengage the device. When disengaged, the torque limiter does not provide significant resistance to rotation.

Upon the completion of one shaft rotation, the torque limiter will automatically attempt to reengage. once the overload is removed and speed is reduced, the drive key will snap back into the engagement slot and the torque limiter will be reset for the next incidence of overload.

Typical Applications:

• Machine Tools

• Woodworking Equipment

• Paper Machinery

• Pumps

• Textile Machinery

• Test Rigs

• Packaging Machinery

• Quarry Machinery

• Post Office Machinery

• Bottling Equipment

• Automatic Furnaces and Ovens

• Bakery Equipment

• Printing Equipment

• Steel Mill Equipment

• Conveyor Drives

• Twin Screw Extruders

• Wood Grinding Machinery

• Ball Mill Drives

• Water Treatment Equipment

• Tunnel Boring Machines