1. TPU in low temp hot melt adhesive net
2.High adhesive force
3.Non- ageing and non-yellowing
4.Pass OEKO-TEX STANDARD
TPU in low temp hot melt adhesive net with paper
Pinghu Zhanpeng Hot Melt Adhesive Web & Film Co., Ltd is specialized in producing hot-melt adhesive products, marketing, and R&D. The area of our factory is more than 15,000 square meters. Our products pass Oeko-Tex Standard 100, Product Class 1 certification and own a very strict quality controlling system.
Adhesive Web characteristic:
Excellent adhesion
Good feeling
Easy bonding
Lower temperature bonding
Good breathability
Non- ageing and non-yellowing
Excellent laundry and dry cleaning resistance.
The Advantage For ZhanPeng Advantage :
1.Good quality
Using original raw material to produce hot melt instead of reusing wastes which increase the product quality and be greener.
2.Strict quality controlling system.
Pass OEKO-TEX Standard100, ISO9001
3.Convenient transportation
It’s closely to Ningbo Port and Shanghai Port
4. Friendly service
Each worker from ZhanPeng keeps belief of Customer first ,Quality best towards to all clients.
Functional specification
Hot melt adhesive film inherited in hot melt adhesive bonding of environmental protection, wide range, rapid bonding characteristics, widely used in textile fabric adhesive, leather products, plastic products adhesive, bonding of foam products adhesive, metal composite plate bonding, electronic field. Often used to sell as a whole, some material back with hot melt adhesive such as: trademark , embroidery , PVC badge, reflective material, decorative , decoration materials and so on.
How to use
Hot melt adhesives, also called thermoplastic adhesives, are basically blocks of thermoplastic adhesive material that can be melted at very high temperatures and applied to a component. When a hot melt dries, it has adhered to the component in much the same way as glue. In fact, hot glue guns use a type of hot melt adhesive.
Note:
Above heat pressing conditions are just for reference, which are also connected with heat pressing machine, the thickness of material needing to be bonded and pressure. Consumers need to test for confirmation according to concrete conditions.