Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
SHENZHEN JOINT TECHNOLOGY CO., LTD.
Business units
ChinaVIP0Audited Supplier
Products: Tracking System , Fuel Sensor , GPS Tracking , Tracking Software , GPS Tracker , Solar GPS Tracker , Fuel Consumption Monitoring , GPS Tracking Device , GPS Tracking Solution , Container GPS Tracker
Response Time: within 24 hours
Response Rate: 100%
+ Follow
View Shop
Chat Now
Related Products
Add to wish list
+ Add a New List
Oil Level Monitoring System with 2 Oil Sensor
Basic Info
Model NO.: GP6000F + JT606X
$0 /Pieces
Product Details
Transaction Comments
Basic Info
- Model NO.: GP6000F + JT606X
- Body Material: Aluminium
- Certification: ISO9001, CE, Anti-Explosion
- Fuel Saver Type: Electronic
- Series Port: 2 RS232, 1 Ttl
- Working Voltage: 10~30V
- Dimension: 121*82*29mm
- Trademark: Jointech
- Origin: China
- Fuel: Diesel
- Component: Fuel Sensor
- Cylinder: Multi-cylinder
- Application: All
- Geo Fence: 64
- GPS Chip: Sirf Star III
- Weight: 820g
- Specification: CE
Product Description
Model : GP6000F
Introduction:
Intelligent GPS vehicle GPS tracker GP6000F mainly use for multi fuel tank monitoring, supporting three fuel tank monitoring at same time.
The feature of 8 I/O signal input, 6 signal output, 2 intelligent programmable port,
3 Serial port, excellent redevelopment frame.
Features:
1. Multi fuel tank monitoring supported
2. Low consumption, wide range voltage input design, Automatic self-check/ protection/recovery during short-circuit
3. Varity of intelligent upload mode, support angle changes uploading.
4. Static Drift processing
5. Built-in 3D G sensor that can suit different project application demands and intelligent detecting harsh braking alarm.
6. Road and polygon shaped geo fence supported,
Alarm for road deviation, road speeding, zone speeding, zone over time parking is available.
7. More than 20 alarms are available (SMS, GPRS)
8. More than 10 kinds of external devices are supported and it can connect three kinds of external devices at same time, excellent redevelopment frame.
9. 43,200 pieces history data, with feature of broken-point continuingly-transferring.
10. OTA
Specification:
Model: JT606X
1. Wide Power Voltage Input
DC: 4-70V, while DC: 4-36V is recommended to ensure the long term stability.
2. Cuttable due to the fuel tank size
It can be cut due to the fuel tank size & installation place in spot, the cut part' length can not over one third of the fuel senor length (before cutting), and it need to be calibrated after cutting.
3. Easy installation
By adopting the unique flange, it just need to drill one hole in the fuel tank to finish the installation, the details is with reference to the installation instruction.
Introduction:
Intelligent GPS vehicle GPS tracker GP6000F mainly use for multi fuel tank monitoring, supporting three fuel tank monitoring at same time.
The feature of 8 I/O signal input, 6 signal output, 2 intelligent programmable port,
3 Serial port, excellent redevelopment frame.
Features:
1. Multi fuel tank monitoring supported
2. Low consumption, wide range voltage input design, Automatic self-check/ protection/recovery during short-circuit
3. Varity of intelligent upload mode, support angle changes uploading.
4. Static Drift processing
5. Built-in 3D G sensor that can suit different project application demands and intelligent detecting harsh braking alarm.
6. Road and polygon shaped geo fence supported,
Alarm for road deviation, road speeding, zone speeding, zone over time parking is available.
7. More than 20 alarms are available (SMS, GPRS)
8. More than 10 kinds of external devices are supported and it can connect three kinds of external devices at same time, excellent redevelopment frame.
9. 43,200 pieces history data, with feature of broken-point continuingly-transferring.
10. OTA
Specification:
| Type | Description | |
| Basic function | Transmission Mode | TCP/UDP/SMS/GPRS |
| Data flow control / Power saving mode | Factory Setting / Define by user / GPS module power off | |
| Intelligent time management of data uploading | Time reference / Week Reference /Day Reference | |
| Motion detection | Build-in 3D G sensor | |
| OTA | broken-point continuingly-transferring | |
| Mileage Statistics | GPS mileage / electronic mileage | |
| Remotely Listen-in | Active / Passive | |
| Geo fence | 64 | |
| Road / Polygon zone geo fence | 100 | |
| Hotspot | 100 | |
| Alarm type | GPRS/SMS/EMAIL | |
| Domain name supported / build-in backup IP supported | ||
| Blind area data uploading / history data intelligent uploading (43,200 pieces) | ||
| GPS open/short circuit detection / GPS signal uploading in real time. | ||
| Self-check, self-recovery, self-protection, build-in back up battery | ||
| Alarms | ||
| Data flow control / Power saving mode | Factory Setting / Define by user / GPS module power off | |
| Alarm function | Enter/Exit geo fence alarm, overtime parking alarm, fatigue driving alarm, over speed alarm, SOS (panic button) alarm, backup battery starting alarm, illegal ignition alarm, harsh braking alarm, vehicle sliding in neutral gear alarm, fuel level change alarm, seat belt unfasten alarm, vibration alarm, tow alarm, hotspot alarm, deviation from the route alarm, over speed in certain road alarm, over speed in zone alarm, late alarm, earlier arrival alarm, temperature change alarm, tire pressure change alarm. | |
| External Device Function | MDT (dispatching board) | Two way voice/SMS communication, dispatching. |
| High precision fuel level sensor | multi Analog/digital, | |
| CCD camera | 6 cameras supported | |
| RFID/Password keyboard/Scanner/Temperature sensor/Tire pressure sensor/Active RFID/Door sensor/Drum rotation sensor | ||
| Control function | Remotely cutting off the fuel pump / 5 output control define by user | |
| I/O Port | 6 Switch signal input(4high level trigger, 2 low level trigger) | |
| 1 Analog signal input(0-5v) | ||
| 1 Pulse signal input (<3.8v,2KHZ ) | ||
| 5 switch signal output | ||
| 3 RS232 Serial port | ||
| 2 Intelligent programmable port(I/O,A/D) | ||
| Parameters | Dimension(L×W×H) | 121×82×29mm |
| Weight | 820g (with standard accessories) | |
| Working current | 60-100mA | |
| Working voltage | 10-30V | |
| Backup battery | 8.4V 400mAh NI-MH battery | |
| GPS chip | SIRF Star III | |
| GSM | 850/900/1800/1900 Mhz | |
Model: JT606X
1. Wide Power Voltage Input
DC: 4-70V, while DC: 4-36V is recommended to ensure the long term stability.
2. Cuttable due to the fuel tank size
It can be cut due to the fuel tank size & installation place in spot, the cut part' length can not over one third of the fuel senor length (before cutting), and it need to be calibrated after cutting.
3. Easy installation
By adopting the unique flange, it just need to drill one hole in the fuel tank to finish the installation, the details is with reference to the installation instruction.
|
NO. |
Item | Performance parameters |
| 1 | Collection principle | Capacitance |
| 2 | Size | 100mm to 1500mm(minimum can be detected 100mm,maximum can be detected 1500mm) There have 3mm blind area of bottom fuel sensor can't be detected. |
| 3 | Electrical parameters | DC: 4-70V, better DC: 4-36V (Over voltage protection, reverse Voltage protection) |
| 4 | Power Consumption | 0.200W/5V,0.286W/12V,0.571W/24V |
| 5 | Signal output | RS232,RS485, 0-5V |
| 6 | Communication baud | 2400,4800,9600,57600,115200 |
| 7 | Resistance ouput | 10~500Ω |
| 8 | Detection of liquid type | Diesel, biodiesel, kerosene, etc. |
| 9 | Resolution | Less than 1mm |
| 10 | Accuracy | ±0.5% |
| 11 | Use of the environment | Work temperature:-40ºC~+75ºC |
| Save temperature:-40ºC~+85ºC | ||
| 12 | Humidity | 0~99% |
| 13 | Detector material | Aluminium alloy |
| 14 | Protection class | IP67 |
Other products from this supplier
Back to top
