Metal sheet Led Troffer Retrofit kit 125Lm/w 2X4ft
The WL-TRRS22/24 LED troffer fixture is a design based on the idea of green energy . It saves about 50% energy compared with the fluorescent troffer. The WL-TRRS22/24 accepts 120-277VAC, and have a high lumen efficiency up to 125-130Lm/W. With well-distributed and soft light, high stability, long life, elegant and special external design. This Luminaries is regarded as the leading of greening Lighting for commercial and industrial uses.
What are Features of Led Troffer retrofit kit
1. 2×2 : 24W/36W
2×4 : 24W/36W/42W/50W
2.Ultra-thin,H:45mm
3.125Lm/W
4.Optional microwave sensor
5.Internal Driver
6.Standard PC diffuser
7.1-10V Dimming optional
8. Easy to install
Installation for Led Troffer retrofit kit
1.Disconnect power of existing fixture.
2.Remove door frame (if installed) and lamps. If clearance permits, abandon ballast and socket bars inside the existing fixture. Otherwise remove them as needed. Please dispose lamps, door frame and ballast properly.
3.Lift luminaire existing housing and slide in both mounting brackets between the housing and the grid. Lower luminaire onto mounting brackets.
4.Hang the LDR by its hinges on one of the mounting brackets.
5.Install disconnect Power as wiring diagram shown above.
6.Wire the existing fixture ground wire to the supplied ground wire/s. If no ground wire exists from the power supply, add ground wire to the existing luminaire housing. The LDR must be properly grounded.
7.Close the Fixture and secure both latches on other side.
8.Reconnect main power.
Certification for Led Troffer retrofit kit
Application:
For Office , School , Hospital , Library , Public Room , Utility Areas
...