Marine Food Waste Disposer
Product Specification
Note:
This product specification includes the usage of this product, operation and maintenance matters needing attention, etc
Please read this manual carefully before using
1. Application
(1) MF type marine food waste disposer is one of indispensable equipments for all kinds of vessels, It designed and manufactured according to the Annex V,Reg.3.(1).(C),Reg.4.(2)and Reg.5.(2).(C).of MARPOL73/78.it can be meet the requirement of IMO completely .
(2). it can smash all kinds of food waste to small particles or starchiness, then discharge though drain outlet, the diameter of waste after crush within 5-8 mm, meet the food waste discharge regulations of IMO.
2. Technical characteristic
(1). Powerful grinding ability, low noise, little power consumption, high temperature resistance.
(2).Little water consumption ,waste can be recover after grinding
(3) Diameter of waste less than 5 - 8 mm
(4).Double-key design ,easy to operate.
(5)Body adopt 304.316 or 316L stainless steel ,anti-corrosion and anti-rust
(6)Air switch control, very safety
(7) Power :220v/50HZ/60HZ/3phase or 380v/50HZ/60HZ/3phase .(according to customer requirement)
3. Main Technical Parameters
Type | Grinding Chamber | Motor Power | Grinding ability | Fixed Knife | Movable Knife | Sieve Dia. | Length | Width | Height | Weight | Rated Person |
| (mm) | (kw) | (kg/hr) | (pc) | (pc) | (mm) | (mm) | (mm) | (mm) | (kg) | Nos |
HSMD180 | 180*230 | 3 | 50-150 | 2 | 6 | >3 | 780 | 600 | 940 | 168 | 50 |
HSMD250 | 250*285 | 4 | 100-200 | 2 | 6 | >3 | 960 | 650 | 1100 | 300 | 100 |
HSMD300 | 300*295 | 5.5 | 200-280 | 2 | 9 | >3 | 1050 | 800 | 1250 | 400 | 200 |
HSMD400 | 400*340 | 7.5 | 200-400 | 4 | 9 | >3 | 1100 | 900 | 1250 | 500 | 300 |
HSMD500 | 500*380 | 11 | 350-450 | 4 | 15 | >3 | 1250 | 1000 | 1450 | 800 | 400 |
4. Matters need attention
(1). More than 95% of the food waste disposer emission is starchiness, its diameter is less than 5-8 mm. Decrease the feed, increase feed frequency and water if the waste is hard or fibrous material. It helps to increase the effect.
(2). Glass, metal, tin cans, ceramic, aluminum, wire, leather, rubber, stone and high fiber, etc. and Corrosive cleaner or similar items are also not allowed to put in the disposer.
(3). Do not overload operation
(4). Shut off the cover after used to avoid hard objects fall into the chamber
(5). For security purposes, line cord must be change by manufacturer if it is damaged.
(6). The food waste disposer can not be used for any other purpose except smashing.
(7). Children are not allowed to use or touch the disposer
5.Operating instructions
(1). Open the cover.
(2). Turn on the power switch
(3). Feed the waste into disposer after it is working.
(4). Make sure the disposer working about 10 seconds after all the waste is smashed and then let the continuous water rinse the disposer and drain line clean
(5). Turn off the power first then the tap
6. Common troubleshooting
Phenomenon | Cause | Handling Method |
1.Could not started | Crushing cavity chocked up with rubbish | Shutdown to remove jammed garbage |
2.No Power | power not supply | check power supply circuit |
3.A sharp voice | Hard project enter in the chamber of disposer | check to clear after Shutdown |
4.Still have the motor vibration afte stoped | Overload automatic protection switch is damaged | repair by the professinal person |
7.After-sale service
1.Our company is in line with the prestige first, quality first principle, responsible for product quality, Product have one year warranty, life-long service, it appears quality problems caused by non-artificial factors in one year , please contact with our company or our local dealer for repair .
