MARINE FLUORESCENT PANDENT LIGHT FIXTURES
Application
This series of lights fit for illumination for the places of shps with water dripping, water spattering, water coagulating (such as weather place, such as oven cabin, dry cabin, tunnel, pipeline and weather deck etc. ) The temperature of work environment is -25℃~55℃.
Characteristic
1. The shell adopts good quality cold-rolled plate by mold pressing, surface is powder coated after anti-acid white.
2. The lampshade is made of transparent impact resistant poly carbonate plastic by injection forming. Lamshade seal-ring use foamed silicone frbber, with good sealed performance.
3. In order to ensure the safety of electricity, both inside and outside of lamps is equipped with " " connection bridge.
4. Equipped with 2C B15d emergency lamp holder, installation 24V/15W emergency bulb, as temporary lighting when power off. With emergency lamp holder lights, on the lampshade with a red remark. The lamp holder lights, on the lampshade with a red remark. The lamp holder is sping holder which can make excellent connection between tube and holder in the case of shakes hsarply.
5. Configured compensating capacitors in inside of light to improve the power factor and reduce losses.
6. The cable outside diameter is Ø11~Ø13mm
Type | 23-2/2J | 23-2E/2EJ | 23-2F/2FJ | 23-2EF/2EFJ | 23-2G/2GJ | 23-2GF/2GFJ | 23-2EZ/2EZJ | 23-2EZF/2EZFJ |
L(mm) | 690 |
L1(mm) | 480 |
Tyep | 33-2/2J | 33-2E/2EJ | 33-2F/2FJ | 33-2EF/2EFJ | 33-2G/2GJ | 33-2GF/2GFJ | 33-2EZ/2EZJ | 33-2EZF/2EZFJ |
L(mm) | 990 |
L1(mm) | 700 |
Type | 43-2/2J | 43-2E/2EJ | 43-2F/2FJ | 43-2EF/2EFJ | 43-2G/2GJ | 43-2GF/2GFJ | 43-2EZ/2EZJ | 43-2EZF/2EZFJ |
L(mm) | 1308 |
L1(mm) | 700 |
H(MM) | 130 | 151 | 130 | 151 | 130 | 151 |
Power | 2x20W 2x30W 2x40W |
Voltage/frequency | 110V/60Hz 220V/60Hz 220V/50Hz |
Power factor | >0.85 |
Lamp holder | G13 |
Protection class | IP67 |