Version Description

The available functional versions of the VA1 board are TN12 and TN13.

Mapping Between the Board and OptiX OSN 9800 Universal Platform Subrack

The following provides the board(s) supported by the product. However, the availability of the board(s) is subject to PCNs. For PCN information, contact the product manager at your local Huawei office.

Differences Between Versions

Specification:

For the specification of each version, see VA1 Specifications.

Substitution Relationship

Update Description

This section describes the hardware updates in V100R001C01 and later versions as well as the reasons for the updates. Any product versions that are not listed in the document means that they have no hardware updates.

Hardware Updates in V100R001C20SPC360

Hardware Updates in V100R001C01

Application

As a variable optical attenuator unit, the VA1 board adjusts power for one optical signal.

Figure 1 illustrates the position of the VA1 board in a WDM system.

Functions and Features

The VA1 board adjusts the power of one optical signal and provides power-off protection.

Table 1 describes the functions and features of the VA1 board.

Table 1 Functions and features of the VA1 board

Working Principle and Signal Flow

The VA1 board consists of a variable optical attenuator, driver and control module, control and communication module, and power supply module.

Figure 1 shows the functional modules and signal flow of the VA1 board.

Figure 1 Functional modules and signal flow of the VA1 board 

Signal Flow

According to instructions from the SCC board, the VA1 board uses its variable optical attenuator to adjust the power of the received optical signal.

Module Functions

Variable optical attenuator

Adjusts the power of the received optical signal.

Driver and control module

Detects the power of the incoming and outgoing signals of the VA1 board.

Provides a drive signal and control signal to the variable optical attenuator, and reports the detected attenuation to the control and communication module.

Control and communication module

Controls board operations.

Controls the operations on each module of the board according to CPU instructions.

Collects information about alarms, performance events, working states, and voltages from functional modules on the board.

Communicates with the SCC board.

Power supply module

Converts the DC power supplied from the backplane into appropriate power required by each module on the board.

Front Panel

There are indicators, interfaces, and a laser hazard level label on the front panel of the VA1 board.

Appearance of the Front Panel

Figure 1 shows the front panel of the VA1 board.

Figure 1 Front panel of the VA1 board 

Indicators

Four indicators are present on the front panel:

Board hardware status indicator (STAT) - triple-colored (red, green, yellow)

Service active status indicator (ACT) - dual-colored (red, green)

Board software status indicator (PROG) - dual-colored (red, green)

Service alarm indicator (SRV) - triple-colored (red, green, yellow)

For details about these indicators, see Board Indicators.

Interfaces

Table 1 describes each interface on the VA1 board.

Table 1 Interfaces on the VA1 board

Laser Hazard Level

The laser hazard level of the board is HAZARD LEVEL 1M, indicating that the maximum power launched by the board ranges from 10 dBm (10 mW) to 21.3 dBm (136 mW).

Valid Slots

The VA1 board is a single-width board (requiring one slot).

Table 1 lists the valid slots for the TN12VA1/TN13VA1 board.

Table 1 Valid slots for the TN12VA1/TN13VA1 board

 NOTE:

When a system control board is installed in slot IU2 of the OptiX OSN 9800 universal platform subrack subrack, the TN13VA1 board cannot be installed in slot IU1.

Characteristic Code for the VA1

The characteristic code for the VA1 board contains three digits, indicating the maximum attenuation supported by the board.

Table 1 provides detailed information about the characteristic code.

Table 1 Characteristic code for the VA1 board

For example, the characteristic code for the VA1 board is 21.5, indicating that the board allows for a maximum attenuation of 21.5 dB.

Physical Ports Displayed on the NMS

This topic describes the interface information on the U2000.

Display of Optical Interfaces

Table 1 provides the mapping between the optical ports on the VA1 board and port numbers displayed on the U2000.

Table 1 Mapping between the optical ports on the VA1 board and port numbers displayed on the U2000

 NOTE:

The port number displayed on the U2000 indicates a physical port pair, in which one port transmits signals and the other receives signals.

Parameters Can Be Set or Queried by NMS

This section lists the board parameters that can be set or queried by using the NMS.

For parameters of the VA1, refer to Table 1.

Table 1 VA1 parameters

By leveraging our strong R&D capabilities, comprehensive technical expertise, and continuous technical innovations, Commai is committed to building an open, flexible, resilient, and secure platform in the Network and communication industry to orchestrate a sustainable, multi-win ecosystem. Following the guiding principle of Business-Driven ICT Infrastructure (BDII), Commai teams up with customers and partners in joint innovations. By doing so, we help customers from a variety of industries – including government and public sectors, finance, energy, transportation, and manufacturing – stay ahead in the new ICT era, and jointly build a Better Connected World.

1.Good Reply: Your inquiry related to our products or price will be replied within 24 hours.
2.OEM&ODM: We can help you to design and put your good idea into products.
3.Warranty: 1-years warranty.

4.Technology support: On-site technical support, Telemaintenance, Free call and E-mail technology supports.

5.Training service support: Provide free training service on installation and debugging.

1.Can we get a lower price? 
   Yes,price is not a problem,everything could be negotiated based on the quantity.

2.What is your MOQ?
   No MOQ for any sample test.

3.OEM,ODM Service is available?
   Yes, Commai have strong ability to offer customers ODM&OEM products of highest quality.
   And it will requirement about your quantity.