The Nankai Biotech Chloramphenicol Residue Rapid Test Kit is a rapid, one step test for the qualitative (or quantitative) detection of Chloramphenicol Residue in feed and grains

at the detection limit of 0.1 ppb.

NKBIO RAPID TEST Advantages:

1. 3-5 min reading results

2. Detection limits respond to EU and US FDA norms

3. Single test for every target sample

4. Neither professionals nor equipment required

5. Eyes interpretation or quantitative measurement,suitable for lab and field use

6. Room temperature storage

7. Non-toxic and harmless

1. INTENDED USE

The N.K.Biotech Chloramphenicol Rapid Test is a rapid test to qualitatively (or quantitatively) detect Chloramphenicol residue in feed and grains. The total assay time takes approx. 20 min.

2. TEST PROCEDURE

1. Remove Chloramphenicol Rapid Test from sealed pouch.

2. Suck at least 3 drops of prepared sample, hold the dropper vertically and transfer 3 full drops(around 100μL) of solution to the specimen well (S) of the test device (See the illustration below), and then start the timer.

3. Wait for red bands to appear. The result should be read in approximately 3-5 minutes. Do not interpret results after 5 minutes.

3. Reading results:

4. STORAGE AND STABILITY

Store at room temperature. The shelf life is 12 months.

5. SPECIFICITY

No cross-reaction with Tetracyclines, Gentamicin or Ampicillin and etc.