KA-DP03D Dimmable Microwave Sensor Specifications:
1) Power source: 100-130V/AC
220-240V/AC
2) Power frequency: 50/60Hz
3) Transmission power: <0.2mW
4) Rated load: 1200W/5A,Max,tungsten(cosφ=1)(220-240V/AC)
300W/2.5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)
600W/5A,Max,tungsten(cosφ=1)(100-130V/AC)
150W/2.5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)
5) HF system: 5.8GHz CW electric wave,ISM band
6) Detection angle: 360°
7) Detection range: 2m-5m-10m(radii.)(adjustable)
8) Time setting: 12sec±3sec/3min±1min/15min±2min/30min±3min(adjustable)
9) Light-control: 10LUX-100LUX-500LUX-2000LUX(adjustable)
10) Installation sit: indoors, ceiling mounting
11) Working temperature: -15°C~+70°C
12) Power consumption: approx.0.5W
13) Standby brightness control range: 10~60% adjustable
Package:
1) White box or customized color box
2) Carton size:c 44*36.5*29m
3) Gross weight:11.6KGS
4) Quantity/carton:100pcs
Product introduction:
KA-DP03D microwave sensor is the third generation microwave sensor which is designed by our company
specially for electronic dimmable ballasts. It uses the technology of MCU automatic control and sets
automation, convinence, energy-saving and practicality in one. It is an ideal microwave sensor for office,
meeting room, hall, corridor, supermarket, department store, dining room, museum and washroom etc.
KA-DP03D Main Features:
1) The brightness is adjustable, it is energy saving and can extend the lifetime of the light tubes. The microwave sensor is using together with dimmable electronic ballasts, it will automatically turn down the brightness of the light tubes when nobody there at a short time (The users can set up the brightness by themselves according to the actual usage), and the light will quickly start to enter in a full-brightness status when somebody there. It can avoid the lifetime reduction of the light tube caused by the frequent start and the flicker phenomenon caused by the start at the full voltage. When nobody there, after the delayting time, the lamp will keep the standby brightness 10-60%(adjustable).
2) Lower high-frequency transmitting power. The high-frequency transmitting power of conventional microwave sensor is around 10mW (EMI limiting value≤25mW). The high-frequency transmitting power of this product is less than 0.2mW, it is 1/50 of conventional microwave sensor in high-frequency transmitting power and 1/625 of cell phones and micro-wave oven in high-frequency transmitting power (EMI limiting value≤1000)
3) Higher detection sensitivity. The detection range of microwave sensor is finite because of the limit of the
transmitting power, most of the detection range is not more than 8 meters. If we want to achieve a farther
detection range, the conventional method is to increase high frequency transmitting power. But It will lead to
the superscale of the limiting value of the high-frequency power. This products introduce double-layer special
designi, it can greatly increase the resolving power of the detection ability, but we don’t need to increase
(evenmore reduce)the high frequency transmitting power, the detection range can be 20 meters or father.
KA-DP03D Detection Information:
KA-DP03D Components Parts Indication:
KA-DP03D Wiring Diagram:
KA-DP03D Actual Image.
We provide white inner box or customized color box. Each inner box including: Sensor + PC bag + User Manual + Screws.
The Standby Brighness Control Knob Enables the users to adjust the suitable standby brightness.
Delayting Time, Ambient Light and Detection Distance is ajustable.