Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Zhejiang Yiyuan Electric Co., Ltd.
Business units
ChinaVIP0Audited Supplier
Response Time: within 24 hours
Response Rate: 100%
+ Follow
View Shop
Chat Now
Add to wish list
+ Add a New List
5000w pure sine wave inverter hitachi inverter 12v 24v 220v inverter solar power system
OverviewQuick DetailsPlace of Origin:Guangdong, China (Mainland)Brand Name:EYENModel Number:APV-5000WOutput Power:5000WOutput Type:Single or
$200 /Piece
Product Details
Transaction Comments
You are here:Home>>Inverter>> Hybrid Pure Sine Wave Inverter>>APV Series
YIY 5000w Pure Sine Wave Inverter Hitachi Inverter 12v 24v 220v Inverter Solar Power System
Product Description
Feature of APV Series Inverter & Charger & Solar Charger
- APV pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle)/3W(30s sensing cycle) *. It can extract max. power from various batteries with different protections.
- High overload ability of our APV charger is up to 300% rated power(20 sec.), and low voltage trip 9.5V/10V or 10V/10.5V is selectable.
- Our APV solar charger can achieve reverse current protection and battery temperature compensation, with the high efficiency MPPT function(97%). Auto input DC voltage can be detected between 12V/24V.
- Our APV pure sine wave inverter supports 3-step intelligent battery charging, and equips with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to 90Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units.
- LCD status display, RS232 communication port, battery/AC priority switch are available for our APV pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
- The APV solar charger has 15s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
- 10ms typical transfer time between battery and AC, which guarantees power continuity of APV pure sine wave inverter. Its input AC voltage is selectable (184-253V or 154-253V) for different kinds of loads.
Product Dominance
On the DC end of inverter, there are 4 DIP switches which enable users to customize the performance of the device.
Switch NO | Switch Function | Position: 0 | Position: 1 |
SW1 | Low Battery Trip Volt | 10.0VDC | 10.5VDC |
SW2 | AC Input Range | 184-253VAC | 154-253VAC |
SW3 | Load Sensing Cycle | Night Charger Function | 3 seconds |
Sw4 | Battery/AC Priority | Utility Priority | Battery Priority |
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0 VDC by default.It can be customized to 10.5VDC
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 3 seconds when SW3 setting position1.
In NIGHT CHARGER position, the inverter will stay in standby mode without sensing loads. It won't output any power even if a load is turned on when working on battery mode.
AC/Battery Setting:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first, and the inverter will transferthe input AC to powerthe load.
The AC Priority and Battery Priority switch is available upon request. When you choose battery priority, the inverter will inverting from battery despite the AC input.
Specifications
| APV Pure Sine Wave Inverter/Charger | |||||||
| Output (Inverter Mode) | Model | APV 1000W | APV 2000W | APV 3000W | APV 4000W | APV 5000W | APV 6000W |
| Continuous Output Power | 1000W | 2000W | 3000W | 4000W | 5000W | 6000W | |
| Surge Rating | 3000W | 6000W | 9000W | 12000W | 15000W | 18000W | |
| Output Waveform | Pure sine wave/same as input(bypass mode) | ||||||
| Nominal Efficiency | >88%(peak) | ||||||
| Line Mode Efficiency | >95% | ||||||
| Power Factor | 0.9-1.0 | ||||||
| Nominal Output Voltage rms | 120/230VAC | ||||||
| Output Voltage Regulation | ±10% rms | ||||||
| Output Frequency | 50Hz ± 0.3Hz/60Hz ± 0.3Hz | ||||||
| Short Circuit Protection | Yes, Current Limit Function(Fault after 1sec) | ||||||
| Typical Line Stansfer Time | 10ms(max.) | ||||||
| THD | <10% | ||||||
| DC Input | Nominal Input Voltage | 12V | 24V | 48V | |||
| Minimum Start Voltage | 10V | 20V | 40V | ||||
| Low Battery Alarm | 10.5V | 21V | 42V | ||||
| Low Battery Trip | 10V | 20V | 40V | ||||
| High Voltage Alarm | 16V | 32V | 64V | ||||
| Idle Consumption- Search Mode | < 25W when power saver on | ||||||
| AC Charger | Input Voltage Range | 95-127VAC | 194-243VAC | 164-243VAC(W) | |||
| Output Voltage | Depends on battery type | ||||||
| Max Charge Rate | 35A / 70A | ||||||
| Battery Initial Voltage for Start Up | 0-15.7V for 12V( *2 for 24V, *4 for 48V) | ||||||
| Over Charge Protection Shutdown | 15.7V for 12V (*2 for 24V, *4 for 48V) | ||||||
| Charger curve(4 stage constant current), battery types 4 step digital controlled progressive charge | |||||||
| Battery type | Fast V, float V ( *2 for 24v, *4 for 48v) | ||||||
| Gel U.S.A | 14 | 13.7 | |||||
| A.G.M 1 | 14.1 | 13.4 | |||||
| A.G.M 2 | 14.6 | 13.7 | |||||
| Sealed Lead Acid | 14.4 | 13.6 | |||||
| Gel Euro | 14.4 | 13.8 | |||||
| Open Lead Acid | 14.8 | 13.3 | |||||
| Calcium | 15.1 | 13.6 | |||||
| De-sulphation | 15.5 for 4hrs | ||||||
| Remote Control | Yes. Optional | ||||||
| Bypass & Protection | Input Voltage Waveform | Sine wave (grid or generator) | |||||
| Nominal Voltage | 120VAC | 230VAC | |||||
| Low Voltage Trip | 90V±4% | 184V/154V±4% | |||||
| Low Voltage Re-engage | 100V±4% | 194V/164V±4% | |||||
| High Voltage Trip | 140V±4% | 253V±4% | |||||
| High Voltage Re-engage | 135V±4% | 243V±4% | |||||
| Max. Input AC Voltage | 150VAC | 270VAC | |||||
| Nominal Input Frequency | 50Hz or 60Hz (auto detect) | ||||||
| Low Freq Trip | 47Hz± 0.3Hz for 50Hz, 57Hz± 0.3Hz for 60Hz | ||||||
| Low Freq Re-engage | 48Hz± 0.3Hz for 50Hz, 58Hz± 0.3Hz for 60Hz | ||||||
| High Freq Trip | 55Hz± 0.3Hz for 50Hz, 65Hz± 0.3Hz for 60Hz | ||||||
| High Freq Re-engage | 54Hz± 0.3Hz for 50Hz, 64Hz± 0.3Hz for 60Hz | ||||||
| Overload Protection | Circuit breaker | ||||||
| Short Circuit Protection | Circuit breaker | ||||||
| Transfer Switch Rating | 30amp | 40amp | |||||
| Bypass Without Battery Connected | Yes(Optional) | ||||||
| Max. Bypass Current | 30amp | 40amp | |||||
| Bypass Over Load Current | 35amp: alarm | 45amp: alarm | |||||
| Solar Charger | Rated Voltage | 12V | 24V | ||||
| Rated Charge Current | 40A | ||||||
| Rated Output Current | 15A | ||||||
| Self Consumption | < 10mA(at idle) | ||||||
| Bulk Charge | 14.5V(default) | 29.0V(default) | |||||
| Floating Charge | 13.5V(default) | 27.0V(default) | |||||
| Equalization Charge | 14.0V(default) | 28.0V(default) | |||||
| Over Charge Disconnection | 14.8V | 29.6V | |||||
| Over Charge Recovery | 13.6V | 27.2V | |||||
| Over Discharge Disconnection | 10.8 V(default) | 21.6V(default) | |||||
| Over Discharge Reconnection | 12.3V | 24.6V | |||||
| Temperature Compensation | -13.2mV/°C | -26.4mV/°C | |||||
| Ambient Temperature | 0-40°C(full load) 40-60°C(derating) | ||||||
| Mechanical Specifications | Mounting | Wall mount | |||||
| Inverter Dimensions(L*W*H) | 598*218*179mm | 470*190*340mm | |||||
| Inverter Weight | 21KG | 23KG | 27KG | 38KG | 48KG | 48KG | |
| Shipping Dimensions(L*W*H) | 740*315*300mm | 530*240*390mm | |||||
| Shipping Weight | 23KG | 25KG | 29KG | 40KG | 50KG | 50KG | |
| Display | Status LEDs / status LEDs+LCD | ||||||
| Standard Warranty | 1 year | ||||||
Wiring
Packaging & Shipping
Packing: cartons shall be used for small items while the wooden crates for big ones
Delivery:20 days after receiving payment( it's negotiable based on the specific order quantity)
Company Information
Our Services
1.We have more than 10 years' experience in foreign trade service.
2.YIYEN/YIY would like to provide OEM/ODM Services to customers via the following ways.
Design for special packing
We could provide the packing design service according to customers' instruction and our experience,including design of printed inner box and carton.
So working with YIYEN/YIY ,no need to worry the design.
•inner box
•carton
Products printing and logo OEM
Most of customers want to develop their own printing or put the logo on the products it's no problem for YIYEN/YIY,because we have professional designers working in our factory.
•adhesive labels
•printing logo
Smaller orders are available
1.YIYEN/YIY always prepare some stocks for hot selling products, so that meet the purchase requirement of smaller order from customers,because we would like to help them grow up at the beginning of business.
2.Some customers trial order,in order to keep more and more business each other in future.
3.During the warranty, any defective product will get repaired or replaced for free.
4.We have our own R&D team and Quality Control System which can guarantee the goods with good quality and advanced technology.
5.Don't hesitate to send inquiry to us when you see our products, we will do our best to reply as soon as possible and help you get more profit here.
6.In 2016, the Rate of Punctual Delivery is 98%.
FAQ
Q 1.What's the payment term?
A.We accept TT,30% deposit and 70% balance agaisnt copy of BL.
Q 2.How's the delivery time ?
A.Usually it will take about 25 days for production.
Q 3.Tell me the standard of package?
A.For the small capacity,it use carton,but for big capacity,we should use strong wooden case for protection.
Q 4.What kind of material of transformer?
A.We have two types, one 100% copper and the other is copper with aluminum.It depends on your requirment.
In fact,those two have no difference if normal work well. Only except the longlife. Copper is better and also higer price.
Q 5.Could you offer Form A or C/O ?
A.It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.
Q 6.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q 7.We want to know month capacity.
A.It depends on which model.For example for relay type small capacity,month capacity can reach near 20000pcs and big capacity near 3000pcs.
Q 8.Where is your market?
A.Our products are popular in russia, indonisia, Philippines,italy, america, pakistan and so on.Some of them are our regular customers and some of them are developing.
We hope you can join us and make mutural benifit from our cooperation.
Q 9.Does the inverter connect with solar system ?
A.Yes.Because of the unique feature which combine invert,charge and AC auto-transfer switch into one complete system,
made inverter not only connect with solar system,also could be used in& officer equipment, household items,power tools ans etc.
Q 10.What kind of certificate you have ?
A.Our company already achieve ISO, CCC, and for products, we have CE, SONCAP, GOST, UL(pending) .
Black To HomePage!
Other products from this supplier
Back to top
