KA-DP12B Microwave Sensor Specifications:

1)  Power Sourcing: 220V/AC-240V/AC            
2) Power Frequency: 50Hz                      
3) Rated Load: 1200W (incandescent lamp)       
                            300W (energy-saving lamp)       
4) Installing Height: 1.5m~3.5m                  
5) Detection Motion Speed: 0.6~1.5m/s           
6) Ambient Light: 5lux, 30lux, 110lux, 2000lux (choice)           
7) Detection Range: 360°
8) Detection Distance: 2m, 5m, 10m (choice)
9) Time-Delay: 12s, 3min, 15min 30min (choice)
10) HF System: 5.8GHz CW radar, ISM band
11) Power Consumption: approx 0.9W
12) Transmission Power: <10mW  

KA-DP12B microwave sensor introduction:

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electro-magnetic wave (5.8GHz), integrated circuit. It gathers automatism, convenience, safety, saving-energy and practicality functions. The
wide detection field is consisting of detectors. It works by receiving human motion. When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide.
Detection is possible through doors, panes of glass or thin walls.

KA-DP12B Function:

1) Can identify day and night: It can work in the daytime and at night when it is adjusted to the “100” position (LUX). It can work in the ambient light less than 10LUX when it is adjusted to the 000” position (LUX). As for the adjustment pattern, please refer to the testing pattern.

2) SENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for detection distance; High sensitivity with 10m, it fits for large room.

3) Time-Delay is added continually: When it receives the second induction signal after the first induction, it will compute time once more on the basic of the first time-delay rest.

4) Time–Delay is adjustable. It can be set according to the consumer’s desire. The minimum time is 12sec.The maximum is 30min.