2016 Hot Design Sand Making Machine/Equipment
1. Brief Introduction:
Vertical shaft impact crusher is also called the sand-making machine. It is high efficient crushing equipment with leading level both home and abroad, which is designed and produced by our company, with introduction of crushing principles and technologies of well-known 'rock on rock' of Barmak company in the USA, and with the practical sand-making situation in China.
2. Product Application:
It widely applies to various of rocks, abrasive materials, refractory materials, cement clinker, quartzite, iron ore, concrete aggregate, etc various of hard and brittle materials for medium or fine crushing. It is specially suitable for making sand for construction and road-building.
3. Operating Principle:
The materials fall into the machine through the feeder hopper and then are divided into two parts. One part enters the high-speed impeller through the middle of the distributor, and are accelerated quickly, which can reach hundreds of times gravitational acceleration. Then they are thrown out of the three even flow channels of the impeller at the speed of 60-70 meters per second. The other part falls around the distributor in an Umbrella form. The two parts meet and impact against and then are impacted to the lining layer of the materials in the chamber together and are bounced back upward obliquely to the top of the chamber, then change the direction downward. The materials thrown from the flow channel of the impeller form continuous curtain. So the materials are crushed, rubbed and ground more than twice. The final products are discharged from the exit at the bottom, forming a closed circuit with screen system. Generally three times circulation can crush the materials under 0.9mm. During the whole crushing process, the materials impact with each other and do not contact the metal parts, but hit the lining layer of the materials and break. This reduces the pollution of the corners and prolongs the service life of the machine. The ingeniuous self-circulation of the air inside the chamber reduces the dust pollution.
4. Product Characteristics:
1. Simple structure and low operating cost
2. High effective and energy-saving; High crushing ratio.
3. With the function of fine crushing and coarse grinding.
4. The high ability of passing non-crushing materials; Less influence of the water content of the materials ( water content can be up to 8%)
5. Ability to crush materials of medium hardness or high hardness.(eg: corundum, sintered bauxite and so on)
6. Cubic final product and little iron pollution
7. The lining layer of the materials themselves reduces the cost of wear and workload of maintenance.
8. Easy operation, maintenance, and arrangement
9. The working noise is under 75 decibel(db level)
10. Light weight; Many methods to install and able to be installed in mobile.
5. Main Parameters:
Model | Max. feed size (mm) | Power (Kw) | Impeller speed (r/min) | Capacity (t/h) | Overall dimension (mm) | Weight(include motor) (t) |
PCL-600 | 30 | 2×30 | 2000-3000 | 12-30 | 2800×1550×2030 | 5.6 |
PCL-750 | 35 | 2×45 | 1500-2500 | 25-55 | 3300×1800×2440 | 7.3 |
PCL-900A | 40 | 2×55 | 1200-2000 | 55-100 | 3750×2120×2660 | 12.1 |
PCL-900B | 40 | 2×75 | 1000-1450 | 65-130 | 3750×2300×2090 | 13.6 |
PCL-1050 | 45 | 2×(90-110) | 1000-1700 | 100-160 | 4480×2450×3906 | 16.9 |
PCL-1250 | 45 | 2×(132-180) | 850-1450 | 160-300 | 4563×2650×3716 | 22 |
PCL-1350 | 50 | 2×(180-220) | 800-1193 | 200-360 | 5340×2940×3650 | 26 |
1. We are Factory(Not Dealer)
All machines from Henan Zhongcheng machinery CO., LTD are made by ourselves with lower price, good quality and we assure full after service. So it is wise of you to buy machines from our factory.
2. Training & Service
*Pre-sale services: Enthusiasm
We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.
*Sale services: Profession.
Skilled technicians are sent to the worksite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.
*After-sale service: Loyalty.
To establish long term friendship, we will regularly pay return visit to customers.
In addition, we provide one-year warrantee to make sure your machine runs properly. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
3. If you are new for this business, we will help you.
Many thanks for your trust. based on your demands and conditions of working spot, we can provide you with design scheme for whole production lines , and the service of spot inspection and operator training. We can also help you choose the right equipment.
4. We'd like to recommend ide which specification you need.Please inform us in your inquiry.
1). What are the materials you deal with(size and type)?
2). What final products do you want(size and variety)?
3). How big handling capacity do you want(t/h)?