Specification of furniture spray booth:
Model# | LY-60 |
Outside Dimension(m)L×W×H | 12×5×3 |
Painting Room Dimension(m)L×W | 3.9×4.9 |
Drying Room Dimension(m)L×W | 8×4.9 |
Incoming Door Dimension(mm)L×W | 1900×2000 |
Delivery Door Dimension(mm)L×W | 1900×2000 |
Air Capacity(m3/h) | 16000 |
Air Speed(m/s) | 0.22-0.3 |
Ventilation Rate(Times/Hour) | 245 |
Fan Power(KW) | 6 |
Detailed Parameters:
Wall Panels | 50mm thick EPS heat preservation wall panels |
Grilles | 30mm*4mm flat iron,12#channel steel |
Lighting | spray booth:18pcs×36w baking booth:4pcs×36w |
Illuminance exceeding 450LUX, non explosive. |
Infrared Heating Tubes | 18units×1kw,additional 18units carbon fiber far-infrared heating tubes, non explosive |
Generator Setting Type | upper intake air |
Intake Air Fan | 2×3KW double-intake centrifugal fans, air capacity:16000m3/h, |
Water Curtains | dimention:3000×400×1500mm(L×W×H),stainless steel. |
Water Pump | brand:Lailibao, capacity:7m3/h, lift:18m, rotate speed:2860rotate/m power:750W 380V/50HZ |
Filter System | pre-filter, high efficiency filter(ceiling filter) |
Total Power(KW) | 24.8 |
Remark: A:The doors in the spray-baking room are sliding doors.
B:Glass of doors is tempered glass.