Heating equipment can be divided into the evaporation chamber, heating jacket, vapor-liquid separators, mixers and other four parts. I plant on the basis of the heating jacket through various research, design a heated, circulating heating, evaporation and crystallization pot, after users reflect the effect of evaporation than the external heating (heating jacket) 1.8 times.
The equipment and product contact parts are used 1Cr18Ni9Ti production, heating evaporation chamber, like a garden tube housing for easy maintenance according to equipment, materials with different thickness of the two sub-processing, with the flange. Back cover can be processed into hemispherical, dish, or cone-shaped device body, the next cylinder is equipped with a sight glass to observe the boiling solution conditions, a high degree of entrainment, the concentration of the solution, crystal size and distribution, etc.; pot into the body hole is to facilitate cleaning, maintenance, heating pot on some welding jacket, its height by calculating the area of evaporation may be required.
Stir currently used anchor stirrer, speed 6-15 r / min and stirring equipment currently used by the next shaft, shaft length can be shortened, easy installation and maintenance.