power supply 600w
latest technology high stability high power 600w universal AC input mode power supply 12v 24v 48v
Features:
1. skillful manufacture, sophisticated technology
2. finely processed,latest technology
3. 105°C output capacitor
4. With short -circuit and overload protection
5. Compact size, light weight
6. 100% full-load burning test
Index Type | SCN-600-12 | SCN-600-15 | SCN-600-24 | SCN-600-27 | SCN-600-48 |
DC Voltage | 12V | 15V | 24V | 27V | 48V |
Voltage Tolerance | ±2% | ±1% | ±1% | ±1% | ±1% |
Rated Current | 50A | 40A | 25A | 22A | 12.5A |
Current Range | 0-50A | 0-40A | 0-25A | 0-22A | 0-12.5A |
Ripple&Noise(Max.) | 200mVp-p | 200mVp-p | 240mVp-p | 240mVp-p | 300mVp-p |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Rated Power | 600W | 600W | 600W | 600W | 600W |
Efficiency | 84% | 83% | 85.5% | 86.5% | 87% |
Voltage Adjust Range | 10-13.2V | 13.5-18V | 20-26.4V | 24-30V | 41-56V |
Voltage Range | 88~264VAC selected by switch 47-63Hz 124~370VDC | ||||
AC Input Current | 11A/115V 7.0A/230V | ||||
AC Inrush Current(Max.) | Cold-start current 24A/115V 45A/230V | ||||
Leakage Current | <3.5mA/240VAC | ||||
Overload Protection | 105-135% TYPE Current limitation auto recovery | ||||
Over-voltage Protection | 13.8-16.2V | 15.5-18.2V | 18-21V | 31-36.5V | 57.6-67.2V |
Over-temperature Protection | ≥55°CFAN ON ≤45°CFAN OFF ≥70°C OUTPUT CUTOUT | ||||
Temp.Coefficient | ±0.03%/°C(0~50°C) | ||||
Setup.Rise,Hold Time | 1.5s,50ms,20ms | ||||
Vibration | 10~500Hz,2G 10min,/11cycle,60min,each axes | ||||
Withstand Voltage | I/P-O/P 3KVACI/P-FG 1.5KVACI/P-FG:0.5KVAC | ||||
Isolated Resistor | I/P-O/P,I/P-FG,I/P-FG 500VDC/100MΩ | ||||
Working Temp.Humidity | -10°C~+60°C,20%~90RH | ||||
Storage Temp.Humidity | -20°C~+85°C,10%~95%RH | ||||
Dimension | 185*120*93mm(L*W*H) | ||||
Weight | 2.0kg | ||||
Safety Standards | UL1950 | ||||
EMC | CISPR22(EN 55022),IEC1000-4,2,3,4,5,6,8,11 IEC1000-3-2 |
Note:
1.All parameters NOT specially mentioned are measured at 230VAC input ,rated load and 25 of ambient temperature.
2.Tolerance:includes set up tolerance,line regulation and load regulation
3.Ripple&noise are measured at 20MHZ of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
4.Line regulation:min&max voltage of the rated load.
5.Load regulation:load from 0 to 100%
Continuously improve CQTS to satisfy customer is our goal !
To satisfy our customers is our goal !