Structure

1)     Furnaces for temperatures up to 1100 °C, 1300°C. 1600°C.

2)     Robust case designs, fiberous liner with ventilation port

3)     Stable bogie-hearth with single-flanged rail wheels.

4)     Heating elements in the bogie hearth covered with resistance wire, silicon carbide or MoSi2 heating elements plates 

5)     High-quality insulation refractory with low power consumption

6)     1400°C, 1800°C grade heating elements wound on ceramic tubes with Max. evergy saving

Chamber Dimensions

Width×Height×Depth --(100—3000)×(100—3000)×(100—3000)mm,

Working temperature

100℃--1100℃, 100℃--1300℃, 100℃--1600℃(continuous)

1200℃, 1400℃, 1700℃(less than 3 hours)

Power

0.5—200KW

Voltage

110 -440V Single or three Phase 50/60 Hz

Thermal couples

K or S or B type

Stability at 1000 °C

+/- 0.5 °C

Uniformity at 1000 °C

+/- 2.0 °C

Max. Heating Rate

50°C/ min

Temperature Control

1)       PID automatic control and auto-tune function.

2)       30 programmable segments for precise control.

3)       Built-in over temperature alarm and protection allows for operation without attendant.

4)       +/- 1 ºC temperature accuracy.

5)       K,  S, B type thermocouple installed for immediate use.

Lift door

hoist (speed 8m/min)

Trolley drive

motor drive, self-propelled

Application Notes

1)      For preserving the longevity of the furnace components, we recommend the heating rate not to exceed 10 °C /min.

2)      Cooling rate shall also not exceed 10 °C /min. 

3)      This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision. 

4)      Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

Warranty

One year limited warranty

We also can produce any specification furnaces according to your detailed requirements