galvanized welded gabion basket leading factory 5*5cm mesh welded gabion box wire fencing
welded gabion box wire fencing:
Welded Gabion box(Welded Gabion Mesh, welded Gabion Box, welded Gabion Basket)
Welded gabion box is manufactured from cold steel wire with high tensile strength. It is electrically welded together then hot dipped galvanized or PVC coated, ensuring a longer life. There are galvanized welded gabions and PVC welded gabions. Welded Gabion box is designed on the principle of mass earth retaining wall. The strength of the wire mesh helps to stand the forces generated by the retained soil.
1.Material: Low carbon steel wire ; Galvanized wire,PVC coated wire
2.Surface Treatment: Zinc coated; PVC coated;
3.Welded Gabion box is composed of welded mesh panel and spring steel lacing wire.
>>>>>>>>>>>>>>>>Send your inquiry for best price
Specifications of durable welded gabion box:
Common Specification of Welded Gabion Box |
Wire diameter:2.0-5.0mm |
Nominal Box sizes(m) | Mesh size(mm) | No. of diaphragms(no.) | Capacity per box(m3) |
1.0x1.0x0.5 | 50x50 75x75 50x100 100x100 | 0 | 0.50 |
1.0x1.0x1.0 | 0 | 1.00 |
1.5x1.0x0.5 | 0 | 0.75 |
1.5x1.0x1.0 | 0 | 1.50 |
2.0x1.0x0.5 | 1 | 1.00 |
2.0x1.0x1.0 | 1 | 2.00 |
3.0x1.0x0.5 | 2 | 1.50 |
3.0x1.0x1.0 | 2 | 3.00 |
4.0x1.0x0.5 | 3 | 2.00 |
4.0x1.0x1.0 | 3 | 4.00 |
Remark:customized size is also available |
Get More Information & Let's Talk Online Now Mike Liu
Email:
Skype:MikeLiu196wiremesh Mobile(Whatsapp):0086
welded gabion box wire fencing Process:
welded gabion box wire fencing Workshop:
welded gabion box wire fencing Application:
Welded gabion box can be widely used in retaining wall structure, rock fall and soil protection and so on. Welded gabions are filled on site with hard and durable stone to form mass gravity structures. And welded gabions are more quicker and simpler to be installed than woven mesh gabions.
Get More Information & Let's Talk Online Now Mike Liu
Email:
Skype:MikeLiu196wiremesh Mobile(Whatsapp):0086
Welded Gabion box advantage
a. Easy to install
b. High zinc coating thus anti-rust and anti-corrosive
c. Low cost
d. High security
e. Can be made into various shapes for decoration
How to install Welded gabion box?
Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.
Step 4. Gabion box filled with graded stone by hand or with a shovel.
Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.
Step 6. When stacking tiers of the welded gabion box, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.
For accurate quotation, the following information would be needed:
1. Mesh size
2. Wire diameter
3. Selvedge wire
4. Lacing wire
5. Surface treatment: hot dipped galvanized, galfan or PVC coated
6. Zinc content
7. Diaphragm
8. Length, width, height
Welcome your detailed enquiry
Anping Xinboyuan Wire Mesh Products Co.,Ltd
Mike Liu(sales manager) Let's Talk Online Now Mike Liu
Email:
Mobile(WhatsApp,Wechat): 0086
Skype:MikeLiu196wiremesh