Nominal Diameter

DN6 To DN3000

Power Supply

220V AC, 24V DC, 3.6V battery type

Signal output

0-10mA / 4-20mA   0-5V/0-10V pulse/freq

Liner Material

Neoprene PTFE, FEP, FEP, PFA PU Ceramic

Electrode

SU316L, HB, HC, Ti, Ta and etc

Flange Standard

ANSI , DIN, JIS

Communication

Modbus, Profibus, Hart, GPRS/GSM

Diameter mm

Flow Range m³/h

Diameter mm

Flow Range m³/h

φ15

0.0636~6.36

Φ450

57.23~5722.65

Φ20

0.11~11.30

Φ500

70.65~7065.00

Φ25

0.18~17.66

Φ600

101.74~10173.6

Φ40

0.45~45.22

Φ700

138.47~13847.4

Φ50

0.71~70.65

Φ800

180.86~18086.4

Φ65

1.19~119.4

Φ900

228.91~22890.6

Φ80

1.81~180.86

Φ1000

406.94~40694.4

Φ100

2.83~282.60

Φ1200

553.90~55389.6

φ150

6.36~635.85

Φ1600

723.46~72345.6

Φ200

11.3~1130.4

Φ1800

915.62~91562.4

Φ250

17.66~176.25

Φ2000

1130.4~113040.00

Φ300

25.43~2543.40

Φ2200

1367.78~136778.4

Φ350

34.62~3461.85

Φ2400

1627.78~162777.6

Φ400

45.22~4521.6

Φ2600

1910.38~191037.6

Liner Material

Main Performance

Application

Neoprene

Good elasticity and high breaking tenacity, good wearing resistance performance; resist common concentrated acid, alkali and salt

Max temperature of medium is 80℃ ;mainly used to measure water, sewage, slurry and pulp etc

PTFE

The chemical performance of PTFE is the most stable in all plastics, and resist boiled hydrochloric acid, sulfuric acid,nitric acid aqua regia, concentrated alkaline and kinds of organic solutions, food degree material

Temperature of medium: -40℃ to 180℃;mainly used to strong corrosive medium like concentrated acid, alkali and sanitary medium

PU(polyurethane))

With excellent wear resisting property(equals to ten times of natural rubber); but bad acidand alkali resisting property

Max temperature of medium should be less than 80℃;used to measure pulp and coal slurry with middle strong abrasion

FEP

Chemical performance is similar wit PTFE, negative pressure resisting property is better than PTFE; food degree material, price is higehr

Same with PTFE

PFA

Chemical performance is similar with PTFE; with good negative pressure resisting property, food degree material, price is higher

Same with PTFE

Electrodes material

Main performance and application

SUS316L

Used to industrial water, life water and sewage etc, with weak corrosion performance,apply to petroleum, chemical, metallurgy industries, and municipal and environmental protection fields

HB

With good corrosion resistance performance to all concentrations of hydrochloric acid below the boiled point

HC

Resist non-oxidizing acid, such as mixture of nitric acid /chromic acid and sulfuric acid; and resist oxidizing salt, such as Fe3+,Cu2+and other oxidizing agents like hypochlorite solution and sea water etc.

Titanium

Resist sea water, kinds of chlorides,hypochlorite, oxidizing acid (including introsonitric acid ) organic acid and alkali etc, but do not resist purified reductic acid(sulfuric acid, hydrochloric acid); Corrosion will reduce greatly when it has on oxidzing agent (like nitric acid and lonic mediums with Fe, Cu) in the acid

Tantalum

Good corrosion resistant property, which is similar with glass; it could almost resist all chemical mediums(including boiling hydrochloric acid, nitric acid and sulfuric acid below 175℃),but do not resist hydrofluoric acid, strong sulfuric acid and alkali)

Stainless steel coated with tungsten carbide

Used to strong wearing mediums without corrosion