1.Diameter Tolerance +0.0, -0.15mm 2.Focal Length about 3% 3.Centration blow 3 arc minutes 4.Clear Aperture up 90%
Plano-Concave Lenses
1.Diameter Tolerance +0.0, -0.15mm
2.Focal Length ±3%
3.Centration <3 arc minutes
4.Clear Aperture >90%
5.Surface Figure λ/4 632.8nm
6.Surface Quality 40-20 scratch & dig
7.Design wavelength 632.8 nm
8.AR coatings None.