Polyethylene polypropylene (polyester) high polymer multilayer waterproof coiled material can meet the requirements of waterproof engineering design and waterproof system.
(1) relying on the surface of the coil network structure and cement structure directly solidified bonding, to achieve permanent solid anti seepage function.
(2) rely on the surface strengthening layer and the cement material protection layer with stable performance to bear the impact on the outside, and ensure that the coil after construction is completely isolated from ultraviolet light.
(3) waterproof system, waterproof coil and building main structure bonding, paving and bonding with the protective layer, color cement material, structural stability is good, not with time prolonged and weakened.
(4) in the whole waterproof system, layers of structure play the blocking role of seepage;
And achieve the overall effect of waterproof engineering.
(5) the product is non-toxic and pollution-free, and it is easy to operate and can be carried out in a humid environment.

It can be used in cold northeast and northwest areas, and also in hot and humid southern areas

Application. Roofing, basement, toilet, subway, loading table, culvert, storage, livestock pond and other projects can be used. The application of waterproofing system in engineering of waterproof roof design, mainly at the grassroots level; application in underground waterproof engineering, welcoming the main design in the primary side; used in indoor moistureproof engineering, the main design between the base and the facing layer; used in underground engineering waterproof lining, between outer lining and lining in the main design in the cave; application of waterproof project, the main design, lining up outside; used in slope tile waterproofing project, the main design of the base layer and the liner layer.

Performance characteristics

1. It solves the problem that most organic waterproof materials can not be directly bonded with cement materials;
2, no organic waterproof products, construction requirements must be dry in the construction of the limitations;
3. Overcome the problem that the waterproof material of organic waterproof coiled material is exposed and easy to damage and aging;
4, overcome the rigid waterproof easy to be affected by the natural settlement of the building and cracking;
5, waterproof system from a single waterproof material to bear all the waterproof function of the method, can reduce project cost, improve waterproof effect.

The company is operating equipment:
1, automatic foam cement insulation block machine; 2, foam light partition board equipment;
3, foam cement delivery pump (lift 80-130m); 4, mortar spraying machine.
Our company deals in products now:
1, foam cement self insulation block; 2, light partition board;
3, silicone waterproof agent; 4, air-conditioning Umbrella (sun is not hot);
5, SBS polyester tire roll; 6, self leveling flat mortar;
7 、 highly effective modified foam agent; 8. Polyurethane waterproof coating;
9, efficient fast coagulation plugging material (water does not leak) 10, polyethylene acrylic (polyester) fiber cloth;
11. Special adhesive powder for polypropylene fabric; 12, alkali free and chlorine free antifreeze;
13 、 cement mortar multi-function waterproof anti seepage agent; 14, polymer cement based waterproof mortar;
15, cement concrete expansion fiber waterproof agent;
16. Water permeable inorganic waterproof agent (DPS permanent condensate);
17, K11, JS waterproof coating;
18 cement based permeable crystalline waterproofing coating (CCCW-C);
19. Building mortar additive (mortar king, Sha Jiangbao);
20, quick solidification grouting (pressure) slurry (for highway collapse, dam plugging);
21, waterproof grouting material and more than 10 products sold in and out of the province.

1, coil joints can be used polymer adhesive material for adhesives, it is best to choose specially formulated poly vinegar adhesive, to ensure that the roll is not deformed.

2. The upper and lower adhesive layer of coil can be modified by dispersing macromolecule polymer.

3. The lower structural adhesive layer shall be applied on the smooth and non smooth base surface, which can be directly constructed on the wet base surface. When the mortar is scraped, the rolled sheets should be spread in time.

4, the upper structure of adhesive layer, the same can be used cement mortar material, it can be waterproof coating on the top surface of the direct brushing construction, and then the protection layer construction.

5, the underground outdoor protective layer is usually pasted with EPS sheets, and the facing layer can be used as the facing layer directly.

Q1:Are you a manufacturer or trade company ?
A: We are a manufacturer.

Q2:What is your terms of payment?
A: 30% by T/T as deposit, and balance payable before delivery against the photos of the products and packages after production.

Q3: What's your packing?
A: Our Normal packing is bulking in Cartons with plastic bag then placed on pallet. We also can pack products according to your requirements.

Q4:Can you produce according to the samples?What is your sample policy?
A: Yes, we can produce by your samples or technical drawings. We can supply the samples, but you are required to pay the sample cost and the freight cost.

Q5: How about the quality of your product?
A: 100% inspection will be done during production. Our products are certified toTS16949 international quality standards.

Q6:How about your delivery time?
A: Generally, it will take about 25-45 days after your advance payment. The specific delivery time depends on the items and the quantity of your order.