Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
HUIZHOU YUXUAN NEW MATERIAL CO., LTD.
Business units
ChinaVIP0Audited Supplier
Products: Heat Shrinkable Tube, Heat Shrink Solder Sleeve Splices, Heat Shrink Butt Connector, Fiber Optic Splice Protector, Heat Shrink Terminals, Heat Shrink Tubing, Heat Shrink Wire Connector, Connector, Insulation Material, Heat Shrink Tube
Response Time: within 24 hours
Response Rate: 100%
+ Follow
View Shop
Chat Now
Add to wish list
+ Add a New List
Waterproof insulated Heat Shrink Butt Connector
OverviewQuick DetailsPlace of Origin:Guangdong, China (Mainland)Brand Name:a-tubeModel Number:BHTType:Crimp TerminalInsulation Material:Poly
$0 /Piece
Product Details
Transaction Comments
Product Description
HSC Heat Shrinkable Butt Connector
(Patent No.:21420862964.2)
|
The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion.
Providing strain relief and against vibration in rugged environment, which completely insulates and protects electrical connections.
In the middle of the splice is high pure copper tube, with excellent conductivity property.
HSC offers long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp terminals.
|
Shrink ratio 3:1 |
Protects splices from water, moisture, condensation, salt and corrosion |
Excellent stretch, puncture and mechanic damage resistance performance |
Excellent conductivity property |
Completely insulates and protects electrical connections |
|
Operating temperature | -55°c~125°c |
Minimum shrink temperature | 80°c |
Minimum fully recovery temperature | 130°c |
|
Test item | Characteristics | Test condition | |
Unaged | Tensile strength | Min. 16MPa | Room temp. |
Elongation | Min. 200% | ||
Aged | Tensile strength | Min. 11.5MPa | 158℃/7 days |
Elongation | Min. 100% | ||
Voltage withstand and breakdown Voltage(Unaged) | Withstand 2.5 KV for 1minute and breakdown | Room temp. | |
Voltage withstand and breakdown Voltage(Aged) | Withstand 2.5 KV for 1minute and breakdown at least half of unaged breakdown voltage | 158℃/7 days | |
Copper corrosion | No corrosion of bare copper | 158℃/7 days | |
Copper stability | No sign of degradation Min.Elongation 100% | 158℃/7 days | |
Cold bend | No crack | -30℃/4 hrs | |
Maximum secant modulus (2%) | 250 MPa | - | |
Volume resistivity | Min.1014Ω-cm | - | |
Heat shock | No crack | 250℃/4 hrs | |
|
Part. No
| Wire Range
| Copper tube (mm) | Heat shrink tube (mm) | Insulator
| Color
| Package
| Approval
| |||||
A.W.G | mm2 | OD | B | L2 | OD | A | L1 | Pcs/bag | ||||
HSC-1 | 22-16 | 0.5-1.5 | 3.3 | 1.7 | 15 | 5.8 | 4.7 | 36.0 | PE | Red | 1000 | RoHS |
HSC-2 | 16-14 | 1.5-2.5 | 4.0 | 2.4 | 15 | 6.9 | 5.7 | 36.0 | PE | Blue | 1000 | RoHS |
HSC-3 | 12-10 | 4.0-6.0 | 5.6 | 3.6 | 15 | 8.0 | 6.7 | 42.0 | PE | Yellow | 800 | RoHS |
|
1: Strip outer wire insulation and insert the wires into the connector barrel.
2: Make sure the wire properly seated and use a crimping tool to crimp the copper tube
3: Heat whole tube using a heat gun until the adhesive flows.
4: Remove from the heat and let it cool for the ultimate connection.
Other products from this supplier
Back to top
