Self-Powered, illuminated markers for marking portable and fixed equipment in low light conditions. No electrical power required! THEY GUIDE YOUR PATH WHEN THE LIGHTS GO OUT.
• The perfect solution for hospitals, auditoriums, stairways, corridors, and theatres • Always on - require no electricity or maintenance • Rugged polycarbonate housing
Product information
Key features
• Absolute reliability in all environmental conditions • Unaffected by humidity and temperature • Continue to operate under water • No Batteries or bulbs required • Maintenance-free, operational life of 10 years • Tough, impact-resistant yet lightweight enclosures • Range of colours, shapes, sizes and fixing solutions
Performance
Standard markers are available with a range of brightness levels, from 80μL to 900μL. Markers can be supplied with green, orange, red, yellow or blue lights. Refer to the marker specification sheet for product options.
Typical Applicayions
• Survival scenarios: marking of vital portable equipment, torch, radio, keys, tents etc... • Fixed equipment: marking of switches, doors and alarm buttons • Route safety: marking of ropes, paths, steps, hazards and obstacles • Remote or unserviced installations: reliable, long-term illumination and marking
Operation
Markers are self-illuminating. They do not require an electrical supply, batteries or bulbs, and will remain continuously illuminated even during prolonged periods of darkness. Illumination is provided by Betalights, gaseous tritium light sources that provide an absolutely reliable luminance throughout their service life of 10 years. They contain no moving parts or consumable components (such as batteries, bulbs or switches). Markers are suitable for use in hazardous atmospheres and will operate normally in adverse environmental conditions, even when immersed in water. They are rated for operation in temperatures of -60 C to 80 C.
PHYSICAL CHARACTERISTICS STANDARD MARKERS
LINE (SURFACE) MP 166
Width : 12.7 mm Height : 14.2 mm Length : 95.3 mm
DOME (SURFACE) MP 152
Diameter : 66.8 mm Height : 33.3 mm
LINE (SURFACE) MP 145
Wide : 12.7 mm Height : 3.1 mm
FLAT TOP (SURFACE) MP 107
Diameter : 28.6 mm Hight : 25.4 mm
Quality Assurance
SRB Technologies are certified to ISO 9001 and meet the requirements of UK Ministry of Defense Standard 62/4.
Regulations It is the buyers responsibility to comply with the local regulations.