Taiwan MEANWELL 12V 100W LED driver LPV-100-12_Lighting Accessories_Lights & Lighting_Sell

Home >Lights & Lighting » Lighting Accessories

SHENZHEN OPLED TECHNOLOGY CO., LTD.

Business units

ChinaVIP0Audited Supplier

Response Time: within 24 hours

Response Rate: 100%

+ Follow

View Shop

Chat Now


Stock:	10000 s
Quantity:	-+ Min Order: piece

Features:

1. Constant Voltage Design
2. Universal AC input / Full range
3. Withstand 300VAC surge input for 5 seconds
4. Protections: Short circuit / Over load / Over voltage
5. Cooling by free air convection
6. Small and compact size
7. Fully encapsulated with IP67 Level
8. Fully isolated plastic case
9. Class II power unit ,no FG
10. Pass LPS
11. Suitable for LED lighting & sign applications
12. 100% full load burn-in test
13. Low cost ,high reliability
14. 2 Years warranty

Model		LPV-100-12	LPV-100-24	LPV-100-5
Size:		1905237mm
OUTPUT	Voltage:	DC12V	DC24V	DC5V
	Rated Current:	8.5A	4.2A	12A
	Current Range:	0∽8.5A	0∽4.2A	0∽12A
	Rated Power:	100W	100.8W	60W
	Ripple & Noise(max.):	120mVp-p	150mVp-p	80mVp-p
	Voltage Tolerance:	±5.0%	±5.0%	±8.0%
	Line Regulation:	±1.0%	±1.0%	±1.0%
	Load Regulation:	±2.0%	±2.0%	±6.0%
	Setup,Rise Time:	2000ms, 25ms / 230VAC 2000ms,25ms / 115VAC at full load
	Hold Up Time(Typ.):	50ms/230VAC 14ms/115VAC at full load
Input	Voltage Range:	90∽264VAC
	Frequency Range:	47∽63HZ
	Efficiency (Typ.):	85%	88%	80%
	AC Current (Typ.):	2.2A / 115VAC 1.2A / 230VAC
	Inrush Current (Typ.):	Cold Start 75A(twidth=700us measured at 50% Ipeak) at 230vac
	Max. No. of PSUs on 16A circuit breaker:	2 units (Circuit breaker of type B) /3 circuit breaker of type C ) at 230VAC
	Leakage Current :	0.25mA / 240VAC
Protection	Over Load:	110- 150% rated output power
	Over Voltage Range::	13.8 ∽16.2V	27.6∽32.4V	5.75∽6.75V
	Protection Type :	Shut off O/P voltage , Clamping by zener diode
Environment	Working Temp.	-25 ∽ +70℃
	Working Humidity:	20 ∽ 90 RH non-condensing
	Storage Temp. Humidity:	-40 ∽ +80℃ , 10 ∽ 95% RH
	Temp. Coeeficient:	±0.03% (0∽ 50℃)
	Vibration:	10∽500Hz, 2G 10min. / 1cycle,period for 60mis.
Safety & EMC	Safety Standards:	UL879, UL1310,CSA C22.2 No. 207-m89,Can/CSA C22.2 No. 223-M91 , TUV EN60950-1, IP67 approved
	Withstand Voltage	I/P - O/P :3KVAC
	Isolation Resistance:	I/P - O/P : >100M ohms / 500VDC / 25℃ / 70% RH
	EMC emission:	Compliance to EN55022 Class B, EN6100-3-2 Class A,EN6100-3-3
	EMC Immunity	Compliance to EN6100-4-2,3,4,5,6,8,11,EN55024,light industry level,criteria A

Quantity per carton	32pcs
Gross Weight per carton	13.8KG
Carton Volumen	0.016CBM

Customer Picture

Factory Picture

Hot Sell Products

1,2,3,4 LENS LED module

1,2,3,4 lens led module,designed by constant current driving. Has highest reliable quality. 160° wide viewing angle makes it much more suitable for channel letters & light box as back light.

1.5W, 2W high power LED module

1.5W,2W high power LED module ,designed by cnstant current driving. 5 years warranty. OP-HSM4028-1 & OP-HSM453-2 are widely used for single side light box as back light. OP-H45SM4028-1 & OP-H45SM4530-2 are widely used for double side light box as side light.

2835 LED flexible strip

DC12V /24V 7.2W/m 5m / roll

Available color: red /yellow/ blue/green/warm white/pure white/cool white /Pink/

5050 LED flexible strip

DC12V/24V 14.4w/m 5m / roll

Available color: red /yellow/ blue/green/warm white/pure white/cool white
/Pink/ RGB

5050 double row LED flexible strip

DC24V 28.8W/M 5m one roll

Available color: red /yellow/ blue/green/warm white/pure white/cool white
/Pink/ RGB

Double color LED strip

Each LED has 2 color (white & warm white),through controller,you can change the color.

RGBW LED strip

Each LED has 4 color (white &red&blue&green),through RGBW LED controller,you can change its color.

RGB Dream Color LED strip

IC controlled led strip. Can get different magic dream color through dream color LED controller.

LED Cabinet Strip

LED Cabinet Strp especial designed for cabinet lighting. Transparent & Mile cover available.

Input Voltage:DC12V , Length:1m

FAQ

Q1. Can I have a sample order ?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for bluk quantity.

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order ?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 3-5 years warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.