Stainless Steel Automatic Mini Peanut/Coconut Oil Press Machine

KXY-OP03 Automatic Mini Coconut Oil Press

his oil press with cold and hot pressing function,fit for more than 20 kinds of materials:such as Peanuts,sesame,walnut,rapeseed,sunflower,soybeans,castor beans,pumpkin seeds,eans,watermelonseeds,moringa seeds,pine nuts,hazelnut kernels,almonds.

1.High oil extraction rate;about 2-3 percent higher than other oil press equipment.

2.Energy saving and labor saving.press 5kg raw materials just needs 1kilowatt-hour.

3.Cold and hot pressing,rich mutrition,pure natural oil,save refining costs.

4.Import dual-core,Intelligence chip.

5.High speed of oil extraction, 0.5kg raw materials only needs 7-10minutes.

6.Virgin food grade 316 stainless steel screw and chamber.

7.easy operation,The elderly and children can use it also.

 Pressing process (Press Peanut for sample):
1. Turn on heating switch and wait for more than 10 minutes and extend the waiting time appropriately during the cold seasons (never turn it off in pressing oil process).
2. Directly put dry ingredients.
3. Press the “squeezing” switch and start pressing oil.
4. After pressing ends, hold (don’t loosen) “Cleanup” switch for more than 20 seconds, and it will be easier to remove the screw and then clean; if you don’t press the Cleanup switch, when pressing chamber becomes cold, the interior residual slag harden and pressing rod will be blocked in the pressing chamber and cannot be taken out for cleaning.
5. In case of power outage during the pressing process, please turn off the squeezing switch, and unplug power plug at the same time; continue to press after turning on the heating switch for more than 10 minutes when power is connected.
6. Clean: remove pressing chamber and clean it with edible detergent and water.
7. Pull out the power plug and store the machine in a dry place.
8. The pressed oil will automatically separate after storing for a night under room temperature 15 degrees above and does not need to filter.
In the process, sometimes materials form aerial state in the feeding port because raw materials are damp, or the surface is not smooth, you can gently touch the raw materials.

 The screw adopts 316 stainless steel, can press both soft and hard raw materials. 

The oil press coats with stainless steel wire drawing, appearance is beautiful. 

New advanced technology and patent screws design, get a high oil extraction rate.

Notice:

• Never put fingers or hard objects such as metal bar into the entrance to the chamber to stir raw materials.
• Olive oil pressing: must remove the core seed and cut the fresh olive into pieces of peanut size, then Dry fresh olive by sunshine or use microwave oven to heat it 5-6 minutes before feed into this machine.
• For pressing olive oil: Please firstly remove the pits and cut olives into pieces of peanut size (which makes it easier to feed in the pressing barrel), also, whole process would take longer time than pressing seeds.
• Special attention to the raw materials can not be pressed, corn, olives, rice, pork, rice.