Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Voltage |
V |
220 |
Rated power |
kW |
0.4 |
Rated torque |
N m |
1.27 |
Peak torque |
N m |
3.82 |
Rated speed |
RPM |
3000 |
Rated current |
Arms |
8.5A |
Peak current |
Arms |
|
Torque constant |
N m/Arms |
0.498 |
Rotor inertia |
kg m 2 ´10 -4 |
0.3221 |
Resistance |
W |
2.73 |
Inductance |
mH |
11.21 |
Cycles Per Revolution |
|
2500 |
|
L |
LM |
LR |
LE |
LG |
LC |
LB |
LA |
LZ |
S |
QK |
U |
W |
T |
|
100W |
110 |
49.5 |
25 |
3 |
6 |
60 |
50 |
70 |
5.5 |
8 |
14 |
1.8 |
3 |
3 |
M3X6 |
200W |
129 |
63.5 |
30 |
3 |
6 |
60 |
50 |
70 |
5.5 |
14 |
20 |
3 |
5 |
5 |
M5X8 |
400W |
157 |
91.5 |
30 |
3 |
6 |
60 |
50 |
70 |
5.5 |
14 |
20 |
3 |
5 |
5 |
M5X8 |
Driver Parameter | |||||||
Model | DNS1-0R8F | DNS1-1R2F | DNS1-1R6F | DNS1-2R0F | |||
Input Voltage | 3phase AC220V -15%~+10% 50/60Hz | ||||||
Enviroment | Ambient Temperature | Operation:0~40°C Storage:-40~50°C | |||||
Humidity | Operation:40%~80%(non condensing) Storage:<93%(non condensing) | ||||||
Protection Grade | IP20 | ||||||
Control Mode | PWM Sine wave vector control | ||||||
Regenerative braking | Internal | ||||||
Feedback manner | 2500 line incremental encoder, Province wire encoder | ||||||
Control Mode | Position | ||||||
Analog Input | -10V~+10V,input against resistance 10K | ||||||
Digital Input | 5 programmable input terminal (optical isolation), the function is: servo enable, alarm clear, forward drive prohibit ,reverse drive prohibition ,forward torque limit, reverse torque limit, emergency stop, electronic gear selector 1,electronic gear selector2, the position deviation Clear, pulse input prohibited. | ||||||
Digital Output | 3 programmable output terminal (optical isolation), the function is: Servo ready, Alarm, positioning is completed, the speed to reach the electromagnetic ,brake torque limit. | ||||||
Encoder Signal Output | Signal Type | A, B, Z differential output line driver), Z signal open collector output. | |||||
Position | Input Frequency | Differential Input:≤500kHz(kpps),Single-ended Input:≤200kHz(kpps) | |||||
Command mode | The pulse + sign; Forward / reverse pulse; orthogonal pulse. | ||||||
Electronic Gear Ratio | 1~32767/1~32767 | ||||||
Monitoring functions | Speed, current position, the position deviation, the motor torque, motor current, the command pulse frequency | ||||||
Protection function | Speeding, over-voltage, over-current, overload, abnormal brake, encoder error, location deviation, etc. | ||||||
Feature | Speed frequency response | >300Hz | |||||
Speed fluctuation rate | <±0.03%(load 0~100%);<±0.02%(power-15~+10%) | ||||||
Speed Ratio | 3.513888889 |