FEATURES
AVERAGE RATED LED LAMP LIFE OF 50,000 HOURS AT L70 IN TA40C ENVIRONMENTS.
DURABLE ALUMINIUM BODY OPTIONS.
HIGH PERFORMANCE OPTICS WITH IMPROVED ILLUMINATION UNIFORMITY.
UV RESISTANT MOULDED LENS WITH INTEGRAL IP65 SILICONE SEAL.
THREE VERSIONS: NORMAL, SENSOR AND EMERGENCY SYSTEM.
FOUR RATE POWER: 9W, 12W, 18W, 24W. LOW PROFILE IP65, IK10 PROTECTION.
AMBIENT TEMPERATURE, -10°C TO 40°C.

CERTIFICATE                                                                                     CERTIFICATE NO.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE                                                                                                        BCTC-2011009787-SZJR
CE                                                                                                        BCTC-2011009788-SZJR

IP65                                                                                                     BCTC-2011009789-SZJR

IK10                                                                                                     WDZ1405120341-1

PRODUCTS QUICK INFORMATION                                             VERSION DIM (MM)                        MASS (KG)

----------------------------------------------------------------------------------------------------------------------------------------------------------------------

NORMAL                                                                                             Φ295×83                                          1.5
WITH SENSOR                                                                                  Φ295×83                                          1.8
WITH  EMERGENCY                                                                        Φ295×83                                          2.2

                    DIM(MM)

PACKING INFORMATION

1. 302×302×110MM INNER BOX  2. 625×315×595MM OUTER BOX  3. EXPENDED PLASTIC COVER                           10 PCS / 1 OUTER BOX

INSTALLATION OR ASSEMBLY INSTRUCTIONS

PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.

importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.

“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”

1. PRODUCT SPECIFICATION:

2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.

3. INSTALLATION DRAWINGS

STEP 1: DRILL FOUR 6MM HOLES IN THE CEILING AND THEN PUT THE SETSCREW INTO THE HOLE.
STEP 2: TAKE OFF THE ENCLOSER AND THE REFECTER.
STEP 3: INSTALL THE BASE ON THE CEILING.
STEP 4: INSTALL THE ENCLOSER AND THE REFECTER ON THE BASE.

4. ELECTRICAL FAULT FINDING AND RELACEMENT:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING MUST BE DONE BY A FULLY QUALIFIED ELECTRICIAN AND, IF CARRIED OUT WITH THE LUMINAIRE IN PLACE, UNDER A PERMIT TO WORK. WITH REPLACEMENT OF ANY PART ENSURE THAT WIRES AND ConNECTIONS ARE CHECKED, AND ANY WIRE SLEEVING REFITTED. FOR CEILING LIGHT DESIGN.