SC/APC Fast Connector Mechanical Connector
Feature
1. Optical Fiber Fast Connector
2. Insertion Loss ≤0.3dB
3. Return Loss ≥50dB
4. SC/APC Type Connector
5. Suitable for FTTH Drop Cable.
Analysis Specification
Item | SC/APC-C Optical Fiber Fast Connector |
Insertion Loss | ≤0.3dB |
Return Loss | ≥50dB |
Fiber | 2.0*3.0 (FTTH Drop Cable) |
Tension | 20N |
Temperature Alteration Ratio | ≤0.5dB(-40 ℃+85℃) |
Temperature | -40℃+85℃ |
Operation Tool
1.Optical Fiber Cutting
2.Covered Wire Stripping Clamp
3.Length Fixed Instrument
4.Wire Stripper
Operating Dimension
Operation Steps:
Note: Following Steps must ensure the cleanliness of product and fiber.
1.Remove the Parts and arrange them in neal row.
2.Penetrate the screw cap through the covered wire cable.
3.Stripe the covered wire, stripped length 50mm.
4.Stripe fiber coating , keep 21mm.
5.Cut out the excess fiber.
6.Fiber length after cut out.
7.Penetrate the fiber, let it a bit bending.
8.Keep fiber bending, and lock the lock catch.
9.Put down tail clip, tighten screw cap, and install the housing.
Re-open
1.Remove the housing ,pull down lock catch.
2.Pull down screw cap, pull out the covered wire, and re-assembly.
Pictures of SC/APC Fast Connector Mechanical Connector
Pakage of SC/APC Optical Fiber Fast Connector