Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Fabric type | Fabric structure | Fabric specs | Ply thickness | Strength(N/mm) | Cover thickness | width | length | |||||
warp | weft | mm/ply | 2ply | 3ply | 4ply | 5ply | upper | lower | mm | m | ||
polyester | polyester | polyamine | EP80 | 160 | 240 | 320 | 400 | 1.5-12 | 0-4.5 | 400-2600 | 50-500 | |
EP100 | 1 | 200 | 300 | 400 | 500 | |||||||
EP150 | 1.1 | 300 | 450 | 600 | 750 | |||||||
EP200 | 1.2 | 400 | 600 | 800 | 1000 | 500-2600 | ||||||
EP250 | 1.35 | 500 | 7500 | 1000 | 1250 | |||||||
EP300 | 1.45 | 600 | 900 | 1200 | 1500 | |||||||
EP350 | 1.6 | 1050 | 1400 | 1750 | 800-2600 | |||||||
EP400 | 1.75 | 1600 | 2000 | 1000-2600 | ||||||||
EP500 | 1.9 | 2000 | 2500 | |||||||||
EP630 | 2.1 | 2400 | 3000 |
Belt carcass | Adhesive strength | elongation | ||
Between plies(N/mm) | Between rubber and carcass | Longitudinal elongation at break%≥ | Longitudinal elongation at reference load%≤ | |
EP canvas | ≥ 5 | ≥ 5 | 10 | 2.0 |
Cover grade | Tensile strength ≥ | Elongation ≥ | Abrasion ≤ | Change rate of tensile strength and elongation after aging |
MPa | % | mm 3 | % | |
RMA1 | 17 | 400 | 175 | -25+25 |
RMA2 | 14 | 350 | 250 | -25+25 |
Z | 15 | 350 | 250 | -25+25 |
Y | 20 | 400 | 150 | -25+25 |
X | 25 | 400 | 120 | -25+25 |
W | 18 | 400 | 90 | -25+25 |