Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
1.Mechanical characteristics | |
1.1 Total Rotational Angle: | 300°±10° |
1.2 Rotational Torque: | 5~90gf.cm |
1.3 Click Torque: | 50gf.cm~200gf.cm |
1.4 Push-Pull Strength: | Pull: 8Kgf Max; Push: 6Kgf Max |
1.5 Shaft wobble: | 0.5 mm Max |
1.6 Detent: | 1(Center) detent, 11,21,42 detents |
2.Electrical characteristics | |
2.1 Total Resistance: | 1KΩ~1MΩ |
2.2 Resistance Tolerance: | ±20% |
2.3 Resistance Taper: | A,B,C |
2.4 Max. operating Voltage: | AC 50V, DC 10V |
2.5 Rated Power: | B Taper 0.05W;Other Tapers:0.025W |
2.6 Rotational Noise: | 100 MV Max |
2.7 Insulation Resistance: | Less Than 100MΩ at DC 250V |
2.8 Withstand Voltage: | 1 minute at AC 300V |
2.9 Residual Resistance: | 20Ω Max |
3.0 Gang error: | 40db~0db±3db |
3.Durability | |
3.1 Rotational Life: | 15,000 Cycles Min. |
3.2 Operating temperature range: | 10°C ~ +70°C |
3.3 Storage temperature range: | 30°C ~ +80°C |
4. Switch Characteristics | |
4.1 Rated Power: | Push: 0.5A at DC 12V |
Rotational:3.0A at DC 16V | |
4.2 Contact Resistance: | Less than 100mΩ |
4.3 Switch Angle: | 50° |
4.4 Switch push stroke length: | 0.5+0.5/-0.3mm |
4.5 Switch torque: | Push: 250~550gf Rotational:100~350gf.cm |
4.6 Switch life: | 15000 circles min |