Technical parameters

working temperature -20-60℃
supply voltage DC5V-24V
output 3 channels
connection mode common anode
external dimension L120ΧW62ΧH27mm
packing size L185ΧW145ΧH52 mm
net weight 226g
gross weight 320g
static power consumption <1W
output current <8A (each channel)
output power 12V<288W, 24V<576W

Touch Remote Control
working temperature -20-60℃
power supply mode AAA X 3
supply voltage 1.5V X 3
transmission frequency 2.4Ghz
standby power consumption 0.015mW
standby current 60uA
working current 200uA
emission current 10mA
remote distance about 30m
standby time 6 months
remote control weight 94g

1.Function on/off and mode key, long press the button, you can turn on/off the output of controller, short press the button, you can switch the mode
2.Match match code key, refer to 4 for use methods; clear code, in the process of using controller, if you no longer want to use the remote control that already code, then you can achive it by clearing code, methods of operation controller is powered off, press and hold “Match” key, then power on, test it with remote control, if you could not control with the remote control, indicates the operation is successful, otherwise repeat this operation.
3.DIP as shown in Figure 3. It is used for matching four groups of address codes of the controller.

5.Power power indicator, it lights when connected with external power supply
6.Signal RF signal indicator, it flashes when receiving correct remote control signal
7.Input/ Output interface the controller power supply input and load output port, please refer to Figure 4 and Table 1 for detailed description.

1. on/off key 2. pause key 3. mode+ 4. mode-
5. brightness+ 6. brightness- 7. speed+ 8. speed- 9. color pulley key