Professional and efficient gypsum drying machine
Equipment advantages:
1.Easy operation and maintenance;
2.High efficiency;
3.Little engineering investment
Desulfurization gypsum drying machine introduction
Nanyang company can provide a rotary drum dryer for just about any industrial drying application. We have been installing dryers for many years and have the knowledge and experience required to provide a cost effective drying solution that not only works but works well.
Desulfurization gypsum drying machine Application
The gypsum drying machine is widely used for drying the Ore,Gypsum,Vinasse,chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. you can use coal, gas, electricity, oil and wind power to heat the dryer machine.
Drying process(the whole process of drying machine)
The main components of the device:
Gypsum drying machine consists of heat source equipment, conveyors, broken device (equipment to broken gtpsum), feeder, feeder, rotary drum, transmission, discharge, grinder, the wind equipment, dust removal
equipment and electric control system structure.
It mainly consists of revolution body, raise material board, transmission device, supportive device and
sealing ring, etc.The heat sources of the drier is from the stove, and is adopts down-flow heating methods. When the materials enter into the body from the feeding device, it will be pushed back by the spire raising board. As the
drier is in an inclined position, the materials will be down to the lower end under the influence of gravity and rotation, but the raising board will be threw to the upper end for scattering. This procession makes the material well-distributed in the body, and then ensure the heat exchange with the heat wind.After repeated cycle with this procession, the moisture content will be dried.( gypsum drying machine )
In our company, this series rotary drum dryer applies the new type scatter plate device; it can guide direction,
flow on an average and scatter the material and so on. And it can make the material in the thin, average and complete condition. Contact the heat airflow completely and use the heat energy fully. Moreover, it adopts reasonable
operational parameter, and compared with general drier, it reduce the coal and power consumption above15-20%,and increase the output above10-15%. At present, it is widely used in cement and gypsum building material (gypsum drying machine)
(Comparison of gypsum drying before and after drying)
Accessories(Supporting auxiliary equipment and accessories)
( Conveyor)
( Broken device )
(The driving gear ring)
(Cyclone dust collector)
(Wet dust collector)
(Pulse bag type dust collector)
Technical Data Sheet of the gypsum drying machine
Model (mm) | Inclination (%) | Rotate speed (r/min) | Air inlet temperature (°C) | Power (kw) | Production capacity(t/h) | Weight (t) |
Φ600x6000 | 2-3 | 6-9 | ≤800 | 3 | 0.1-0.2 | 2.3 |
Φ800x8000 | 2-3 | 6-9 | ≤800 | 4.4 | 0.3-0.5 | 3.5 |
Φ1000x10000 | 2-3 | 6-9 | ≤800 | 6 | 0.5-0.8 | 5.6 |
Φ1200x12000 | 2-3 | 6-9 | ≤800 | 7.5 | 1.0-2 | 10.4 |
Φ1500x16000 | 2-3 | 6-9 | ≤800 | 15 | 2-3 | 14.8 |
Φ1800x18000 | 2-3 | 6-9 | ≤800 | 22 | 3-5 | 24 |
Φ2000x20000 | 2-3 | 6-9 | ≤800 | 37 | 6-9 | 28.5 |
Φ2200x20000 | 2-3 | 6-9 | ≤800 | 45 | 10-12 | 34.7 |
Φ2400x20000 | 2-3 | 6-9 | ≤800 | 55 | 12-15 | 46.2 |
Φ2600x22000 | 2-3 | 6-9 | ≤800 | 75 | 20-25 | 72 |
Φ2700x24000 | 2-3 | 6-9 | ≤800 | 90 | 23-30 | 83.2 |
Φ3000x24000 | 2-3 | 6-9 | ≤800 | 110 | 30-40 | 125.3 |