Photocell Automatic Glass Door
Sectional Drawing,
Intelligence,
a)controlled by the microcomputer digital chips ,giving the control unit multiple programmable modes including provision to interface with builidng security system, monitoring the doors position status,built-in UPS,etc
b)Wide operational parameter setting like speed,hold-on time,power,etc
Safety,
a)Safety bea sensor safety to prevent from clamping person
b)Auto-reversing when confronting with obstacle.
c)UPS when power fails to provide escaping passage
d) The microcontroller also provide the interface for alarming system ,safety system ,etc
e)Fuse protection at 1A, 250V
f)Protection when working temperature is over setting value
Reliability,
a)Imported Microchips MCU to control the door working. 24V,60W, DC bruthless motor have big power to hold 150kg panels, work a long time and noise is 50db to 60db.
b)With the help of advanced synchronous belt and perfect design of power supply circuit , the door moves very stably.
c)Panasonic track and anti-derail rubber on the hanger roller to protect from derailing. Our this techniques is veyr mature. and can promise it can't derail.
Automatic Door Closer Specification,
Door model | Single | Bi-Parting |
Door width | 700-1300mm | 600mm-1250mmn |
Door weight | 150kg | 150kg x 2 |
Opening speed | 15cm-50cm/s | 15cm-45cm/s |
Closing speed | 10cm-45cm/s | 10cm-43cm/s |
Hold on time: | 0-9s |
Motor | brushless 24 volt DC,60W ,high torque 3000r/min |
Microcontroller | PLC techniques and 8 bit chip, Visialbe adjustment screen |
Power supply | 110V-250V,60Hz/50Hz |
Profile size | 4200mm(L)x 128mm(H)x 100mm(W) |
Components,
Retro-fit kit |
1 | Motor & Gearbox | 1pcs | China-made 24V,60W ,DC bruthless motor |
2 | Microcontroller | 1pc | 8 bit Microchip chip |
3 | Radar | 2pcs | Optex OM104C microwave sensor or infared sensor |
4 | Learning code remote controller | 1set | Hold-open,lock,exit only, half-open,automatic |
5 | Carriage | 4pcs | 2 running wheel |
6 | Tooth belt | 1pc | 8m, fiberglass tensile elements, nylon surface |
7 | Belt clamp | 2pcs | |
8 | Idle pulley | 1pc | Aluminum alloy |
9 | Stopper | 2pcs | Aluminum alloy |
10 | Connection termial | 1pc | For 220V power ,and outside sensor connection |
Profile |
1 | Track | 1pc | 3mm thickenss, Anodize, height 125mm, depth 100mm,length 4200mm |
2 | Cover | 1pc | 170mm height,anodized |
Options |
1 | Photocell | 1set | factory,made |
2 | Electro-mechanical lock | 1set | 12V,time delay |
3 | Emergency battery | 1set | 12V,7Ah,contiunously working half an hours |
4 | Control panels | 1set | LCD display, key swtich,5 program adjust |
5 | Floor guide | 2pcs | For frame and frameless door |
6 | Glass clamp | 2pcs | 1m length, fit to 10mm,12mm glass |
Factory,
...