Application of Evergain White Glue
Widely used in building decoration, printing industry of paper pasting, carton welt, common wood and paper processing, as well as mixing cement mortar, wall repairing, wall space crack calking, and used for the repair of veneer plywood or single board and secondary processing of man-made board, etc.

Direction of Evergain White Glue
1. Make sure bonding surfaces should be clean, dry and spotless
2. Stir the product evenly and apply it thinly to the side of the adhesive
3. Apply the pressure to the both bonding surfaces by pressing them, using clamps, tape, or weights .
For bonding surfaces under pressure, the pressure time shall be extended.

Attention of Evergain White Glue
(1) This product is a safety green environmental protection product; if accidentally the glue splashed into the eyes or mouth, should clean with plenty of water.
(2) This product is stored in a cool and ventilated place and should be stirred well before use. If it is beyond the storage period, it can be used after examination.
(3) This product is water-based adhesive, do not mix with other properties of adhesive or solvent based glue.
(4) This product is stored in a cool and ventilated place at 5~40℃. It is strictly prohibited to expose to sunlight and cold. The shelf life of the seal is 12 months.