Industrial Brush
Civilian Brush
Brush Equipment
Brush Raw Materials
Decoration Materials
∨
∧
Shenzhen ES AQUA Machinery Co., Ltd.
Business units
ChinaVIP0Audited Supplier
Response Time: within 24 hours
Response Rate: 100%
+ Follow
View Shop
Chat Now
Add to wish list
+ Add a New List
PET , Aluminum soda&beer Can Filling machine and sealing Machine
OverviewQuick DetailsPackaging Type:CansPackaging Material:Metal, PlasticType:Filling MachineCondition:NewApplication:BeverageAutomatic Grad
$10000 /
Product Details
Transaction Comments
Aluminum Can Filling Machine
Product Description
The basic data of the Item
The unit of the Item:
1. The name of the Item: The Scheme of carbonated aluminum can drink production line
2.The basic information: 50 cans per min
3. The package: 300-750ml
4. The environment: clean and stable
5.temperature: 10~40℃
6.Relative humidity: ≤90%
7. The power conditions: Voltage AC380V±10% AC 220V±10% Frequency 50HZ±2%
Main equipments introduction of the PET can making and filling part:
Part 1:Filling and sealing combined machine:
1. Can loading turn-table
This turn-table is a simply device that tidys the empty cans up. This table will be put on a high paltform.
The workers carry the empty cans to paltform and put them on the turn-table. The cans will be carried to
the can washing machine by the turn-table.
2. Slideway can washing machine
The front can turning- over cutter cage of the washer is connected with the rapid transportation of the
unpiler. The empty cans that come from the can turning-over machine have a 90°turn. Then the can
entering the washing tank of the empty can wash by the opening downward. There is a spray tube on the
bottom of the tank and 12 Nozzles that can spray 850mm clean water column. The back of the tank is the
drain part. The water, which sprayed into the empty can flow back the tank, then the wastewater
discharged by the discharge pipes. After cleaning the empty can have a 90°turn by the back can turning-
over machine, then the can entering the feed conveyor belt by opening upward.
Main technical parameters:
Production capacity | Can/min | ≤200 |
| |
Suitable for can | Diameter | Mm | Φ52~Φ105 | Each type matched a set of conveyor slideway |
Height | Mm | 80~200 | ||
Inlet spray tube | - | - | G1 threaded | |
Connecting outlet tube | - | - | Φ48stainless steel tube | |
Water pressure | MPa | ≥0.3 |
| |
Water consumption | M3/min | ≈0.05 |
| |
Weight | Kg | ≈100 |
| |
Long of the tank | M | 1.7 |
| |
Long of the spray tube | M | 0.85 | ||
2.Filling and sealing combined machine
This combined machine is suit for the isobaric filing and sealing of carbonated drink beer and beverage.
The combined machine adopts single- room filling valve, thus there is no air bubbles while filling. The two
heavy curling spinning shapes the sealing that is controlled by the frequency controller, having the
characteristics of calmly filling, high speed, stable liquid level, no can no filling, stepless speed adjusting,
etc. It is fit for all kinds of pull-tab cans.
The framework of the combined machine is made of carbon steel, the part of machine which contacts with
the material such as filling valve and material cylinder are made of stainless steel. The wheel of sealing is
made of high-strength material, and titanium surface.
Main technical parameters:
Item | Unit | Indicators | |
Production capacity | Cans/min | ≤50 | |
Suitable for type | Diameter | Mm | Φ65 |
Height | Mm | 122 | |
Filling position | Unit | 36 | |
Sealing position | Unit | 6 | |
Range of filling | Ml | Setting the filling range by consumers’ request | |
Rate of waste product |
| ≤3‰(except the can factors ) | |
Power condition | Voltage | V | AC380±10% |
AC220±5% | |||
Frequency | Hz | 50±2% | |
Air pressure | MPa | 0.6~1 | |
Main machine power | Kw | 7.5 | |
Total weight | T | 4 | |
Dimension | M | 3.4×1.95×1.9 | |
Related products:
Our Services
What service ES AQUA LTD can offer you?
Your inquiry related to our product & price will be replied within 12 hours.
Well-trained & experienced staff are to answer all your inquiries in English and Chinese.
Working time: 8:00am ~10:00pm, Monday to Saturday(UTC+8).
OEM & ODM projects are both available.
Your business relationship with us will be confidential to any third party.
Good after-sale service offered, please get back to us if you got any questions.
After Sales Service
One year warranty for the whole system .
Free equipment installation and debugging.
After one year , we can help you to maintain the machine and the accessories are provided only one the cost price.
We can provide internship service and help you train the operator and mechanic.
Free production technology and process configuration.
We can help you to design the product line , workshop and provide turn-key project.
Other products from this supplier
Back to top
