FEATURES

TOUGH SINGLE PIECE POLYCARBonATE BODY
16MM KNOCK OUT CABLE ENTRY
GASKET IS EASILY REPLACEABLE
SINGLE PIECE, CLEAR PRISMATIC POLYCARBonATE LENS OR TRANSLUCENT OPAL LENS
BOTH DIFFUSERS HAVE SMOOTH EXTERIORS FOR EASY MAINTENANCE
SUPPLIED STANDARD WITH HIGH TEMPERATURE PORCELAIN ES LAMP HOLDER
RATED AVERAGE LIFE OF 35,000 HOURS*, 6000K
AN ENERGY EFFICIENT WEATHER RESISTANT IP66 SYSTEM

APPLICATIONS

STAIRWELLS, WALKWAYS, GENERAL SECURITY, COMMERCIAL, INDUSTRIAL, DOMESTIC LIGHTING, UNDER EAVES AND AWNINGS.

CERTIFICATE                                                            CERTIFICATE NO.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CE                                                                               BCTC- 150911288
CE                                                                               BCTC- 150911289 

IP66                                                                            BCTC- 150911290 

PRODUCTS QUICK INFORMATION                    VERSION                                   DIM (MM)                                        MASS (KG) 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ASTRA                                                                         3W  NON-MAINTAINED         347 × 108 × 78                             0.8

ASTRA                                                                      12W MAINTAINED                     347 × 108 × 78                             0.8

                                                                                                        ASTRA SERIES

PACKING INFORMATION

1. 365×115×85MM INNER BOX                         2. 370×345×580MM OUTER BOX                          *20 PCS / 1 OUTER BOX

INSTALLATION OR ASSEMBLY INSTRUCTIONS

PLEASE READ THESE INSTALLATION INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR MAINTAINING THIS
EQUIPMENT. THESE INSTRUCTIONS AND LOCAL REGULATIONS(WHERe APPLICABLE), BY AN AUTHORISED AND LICENCED ELECTRICIAN.

importANT – THE PRODUCT MUST BE MAINTAINED AND OPERATED IN ACCORDANCE WITH THE MANUFACTURE’S INSTRUCTIONS, FAILURE TO DO SO MAY DAMAGE THE PRODUCT AND SERVICES. IT IS STRonGLY RECOMMENDED THAT THIS importANT NOTE BE COMMUNICATED TO THE OWNER AND OR OPERATOR OF THE INSTALLATION AT THE TIME OF SITE COMMISSIONING. GOOD PRACTICE DOES NOT RECOMMEND THE 24/7 USE OF PRODUCTS WITHOUT THE APPLICATION OF SUITABLE SWITCH CYCLE INTERVALS. P&Q IS NOT RESPonSIBLE FOR ANY PRODUCT NOT MAINTAINED IN ACCORDANCE WITH THE RECOMMENDED PROCEDURES. ALL PRODUCTS SHOULD BE THOROUGHLY CLEANED ON A REGULAR BASIS TO ENSURE THE OPTICAL PERFORMANCE, TOGETHER WITH THE ELECTRICAL,MECHANICAL AND STRUCTURAL INTEGRITY AS DESIGNED, IS MAINTAINED THROUGHOUT THE SERVICE LIFE OF THE PRODUCT.

“ConSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR”

1. PRODUCT SPECIFICATION:

2. STORAGE: PRIOR TO INSTALLATION PRODUCTS ARE TO BE STORED IN COOL AND DRY CONDITIONS.

3. INSTALLATION DRAWINGS

STEP 1: DRILL FOUR 6MM HOLES IN THE CEILING AND THEN PUT THE SETSCREW INTO THE HOLE.
STEP 2: TAKE OFF THE ENCLOSER.

STEP 3: OPEN THE GEAR TRAY, THEN INSTALL THE BASE ON THE CEILING.

STEP 4: INSTALL THE ENCLOSER ON THE BASE.

4. ELECTRICAL FAULT FINDING AND RELACEMENT:
THE SUPPLY MUST BE ISOLATED BEFORE OPENING THE LUMINAIRE. IF ALL ConNECTIONS ARE VERIFIED TO BE CORRECT, THE PRODUCTS ENVIRonMENT MAY BE HAVINg AN ADVERSE EFFECT TO THE COMPONENTS. IF THIS IS THE CASE PLEASE ConTACT YOUR SUPPLIER FOR A MORE SUITABLE REPLACEMENT. ANY FAULT FINDING MUST BE DONE BY A FULLY QUALIFIED ELECTRICIAN AND, IF CARRIED OUT WITH THE LUMINAIRE IN PLACE, UNDER A PERMIT TO WORK. WITH REPLACEMENT OF ANY PART ENSURE THAT WIRES AND ConNECTIONS ARE CHECKED, AND ANY WIRE SLEEVING REFITTED.