•High flux density of lighting source
•Good color uniformity
•RoHS compliant
•Engine Star binning structure
•More energy efficient than incandescent and most halogen lamps
•No UV
•Long lifetime

Optical Characteristics, TC= 25°C

1.Storage
Please do not open the moisture barrier bag (MBB) more than one week. This may cause the leads of LED discoloration. We recommend storing LEDs in a dry box after opening the MBB. The recommended storage conditions are temperature 5 to 30°C and humidity less than 40% RH. It is also recommended to return the LEDs to the MBB and to reseal the MBB.

2.The slug is not electrically neutral. Therefore, we recommend to isolate the heat sink.

3.Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering.

4.Please avoid rapid cooling after soldering.

5.Components should not be mounted on warped direction of PCB.

6.Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable, a heat plate should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

7.This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When cleaning is required, isopropyl alcohol should be used.

8.When the LEDs are illuminating, operating current should be decide after considering the package maximum temperature.

We can ship by Courier Service such as Fedex, DHL, TNT, UPS EMS ...etc.
 Also, Air Freight and Sea Freight depends on clients needs.

A: Yes, we welcome sample order to test and check quality.

A:1-2 weeks depends on different items

A: Low MOQ, 1pc for sample checking is available

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. 

A: please kindly contact us for more detail