Worktop

(Optional)

1.Water tap with 3 outlets,whose body is made of brass with the treatment 
of acid and alkali resistant,rust protection
2.Maximum Water pressure:147P.S.I
3.Gooseneck spout:360°swing
4.the other 2 spout can be dismantled easily for block,which can be removed by new spout available for high water pressure

Multifunctional power socket with safe protective door in the jack,which can be used in any instrument.

Cabinet Body

(PP)

1.ROCHLING 8mm thickness pp board with acid and alkali resistant 

2.Drawers material same as cabinet body,3 guide rails and inhibiting device are installed in both sides.

3.pp with acid and alkali resistant for handles and hinges

Cabinet Body

(steel)

1.1.0 or 1.2mm thickness first grade baosteel cold-roll steel sheets with phosphoric acid pickling,
surface coating epoxy resin powder with Electrostatic spraying for anti-corrosion treatment

2.Drawers material same as cabinet body,3 guide rails and inhibiting device are installed in both sides.

3.Stainless Steel Hinges
4.Steel Long type handle or stainless steel C type handle or aluminium alloy C handle

Cabinet Body+Main frame

(Steel Wooden)

Steel Structure:

1.The bench is supported by cold-roll steel sheets(baosteel,an gang) and 1.5mm thickness with 40*60 rectangular steel tube
2.The whole lab work bench can be beared for the bulk with 300kg/square meter
3.All the steel materials are prevented from corrosion of metals by the use of phosphoric acid pickling,
4.Work bench can be installed with adjusting gaskets at the end of feet which can be adjusted more than 30mm height if the need is offered.

Cabinet Details:

1.18mm thickness melamine board whose edge is covered with 2mm thickness PVC with the treament of melting,sealing for waterproof

2.Melamine board with the treatment of edge banding
3.Each side of the wall is tightly combined by screw 
4.The screw of handle is perfectly inserted into the wall of drawers to be of best quality
5.3 guide rails and inhibiting device are installed in both sides.

6.Stainless Steel Hinges
7.Steel Long type handle or stainless steel C type handle or aluminium alloy C handle

Cabinet Body

(wooden)

1.18mm thickness melamine board whose edge is covered with 2mm thickness PVC with the treament of melting,sealing for waterproof

2.Melamine board with the treatment of edge banding
3.Each side of the wall is tightly combined by screw 
4.The screw of handle is perfectly inserted into the wall of drawers to be of best quality
5.3 guide rails and inhibiting device are installed in both sides.

6.Stainless Steel Hinges
7.Steel Long type handle or stainless steel C type handle or aluminium alloy C handle

Reagent rack

(Steel and Glass)

Reagent rack

(Wooden)