PARAMETER

VALUE

Model

FSM-80S Fusion Splicer

Applicable Fibers

Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)

Fiber Count

Single, 2, 4, 5, 6, 8, 10, 12

Cladding Diameter

125 μm

Coating Diameter

Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm

Fiber Cleave Length

10 mm

Typical Average Splice Loss

0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards

Splicing Time

Typical 15 seconds with standard single-mode fiber

Arc Calibration Method

Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available

Splicing Modes

100 preset and user programmable modes

Splice Loss Estimate

Based upon dual camera cladding alignment data

Storage of Splice Result

Last 2000 splice results stored in the internal memory

Fiber Display

X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation

Magnification

35X to 90X

Viewing Method

Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating

Operating Condition

0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50C respectively

Mechanical Proof Test

1.96 to 2.25 N

Tube Heater

Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time

Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with micro sleeves

Protection Sleeve Length

60 mm, 40 mm, Micro

Splice/Heat Cycles with Battery

Typical 110 cycles with power save functions activated

Electrode Life

1,500 Arc Discharges

Power Supply

Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery

Terminals

USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03

Wind Protection

Maximum wind velocity of 15m/s (34 mph)

Dimensions

146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)

Weight

2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery