Styrofoam, Polystyrene,Fabric rope hot knife cutter

TOPlink hot knife cutter a wonderful tool with good cutting effect. There is no rough burr after cutting. It is power saving and easy to operate. The temperature of blade can go up to 400°C.It takes within 6 seconds to get up to 400 °C.The structure is reasonable and comfortable for using. Most customers use this heating banner cutting tool to cut fiber banner or other advertising fabric graphics well.

1.Cut mooring rope with in 2 cm diameters .cut flat woven bag with even fracture and no thread loosing .

2.Cut the sewing tampons of cloth toys and ton bag with melt fracture.

3.It is most suitable to process sail cloth ,awnings and filter cloth (synthetic fabrics with thickness of 0.3mm or more).cut all kinds of fabrics (clothing ,banners ,silk,chemical fiber cloth,velvet,advertising cloth,non-woven,nylon fabric.wallpaper mural plastic sheeting),it will heal the contact area while cutting ,which results in smooth and even cut surface ,without thread pulling or burrs by welding the interface ,[note]coupled with incision blade ,it can be used to cut thin plastic sheet ,or used in some simple cutting occasions ,and for cutting plastic pipe.

Features:
• Durable and Practical.
• No rough burr after cutting.
• Power saving, only 100W.
• Long life span and can non-stop run .
• Much lighter and easier for shipping with low shipping cost.

Details of one set

Suitable to process sail cloth ,awnings and filter cloth (synthetic fabrics with thickness of 0.3mm or more).cut all kinds of fabrics (clothing ,banners ,silk,chemical fiber cloth,velvet,advertising cloth,non-woven,nylon fabric.wallpaper mural plastic sheeting)