MS5208 Insulation Meter
Specifications
General Specifications
l Complies with IEC/EN 61010-1 1000V CAT III ,600 V CAT IV.
l 1000V DC Voltage,750V AC Voltage(TRMS).
l 6600 Count(except for capacitance,temperature,insulation).
l When the input terminals is V and COM,The overload protective voltage is up to AC 250 V (TRMS) ;When the input terminals is mA and COM, protective Current is 0.4A; when the input terminals is Hi and Lo , The overload protective voltage is 600V.
l Batteries:Four AA batteries (NEDA 15A or IEC LR6)Meter use 1000 hours; Insulation test use: Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩwith a duty cycle of 5 seconds on and 25 seconds off.
l Insulation Measurement Range : 0.01 MΩ to 2 GΩ.
l Insulation Test Voltages : 50, 100, 250, 500, 1000 V .
l Insulation Source Voltage: + 20 %, - 0 %.
l Insulation Short-Circuit Test Current : 1 .5mA nominal.
l Insulation Auto Discharge : Discharge time <1 second for C = 1 μF or less.
l Insulation Live Circuit Detection : Inhibit test if terminal voltage > 20 V prior to initialization of test.
l Insulation Maximum Capacitive Load: Operable with up to 1 μF load.
l Storage Temperature : -40 °C to 60 °C.
l Operating Temperature: 0°C to 40 °C .
l Storage Altitude: 12000m
l Operating Altitude: 2000m 1000V CAT III,3000m 1000V Ⅱ
l Temperature Coefficient: 0.05 × (specified accuracy) per °C for temperatures < 18 °C or > 28 °C.
l Relative Humidity: 40%~75%.
l Size: 205(L)×102(W)× 58(H)mm.
l Weight: approx 390g.