High quality wholesale inflatable windsurf boards

Inner Packing: Air bag, plasitc bag and poli foam.

Outer Packing: Standard Shipping Caton Box.

Packing Size 13.7 x 17.7 x 33.5 inch (35*45*85 cm)

  High quality wholesale inflatable windsurf boards

 Why  Sunshine inflatable SUPs are better?

1. Sunshine Inflatable SUPs sell at the Lowest Prices in the world! We are manufacturer and do not feed an middle men in our supply chain. We sell direct. Our paddle boards are same quality or better than SUPs sold for over $1000. Why pay more?! We sell best quality inflatable SUPs at reasonable prices! And paddle, air pump and repair kit is included!

2. Sunshine offers a 3 year warranty, while most other brands only stand by their product for 1 year!

3. Sunshine  offer inflatable paddle boards made of 100mm (4")  and 150mm(6") thick drop-stitch fabric, while most other SUPs on the market are made of 100mm (4") thick. That is almost 40% more air volume! More air means more buoyancy and better performance under heavier weight loads.

4. FULL Money Back Guarantee! Try Saturn on water for 14 days. If you don't like it, send it back for a refund. So far, not a single Saturn SUP was ever returned back!

FAQ     

Sunshine Paddle Boards FAQ Questions:

Our Product

How do I use the hand pump to bring inflatable paddle board to high pressure? When using the hand pump to inflate paddle board do not use only your hands and arms when the pressure gets higher. Use your body weight to push the handle of the hand pump down. Bend at the knees and lock your arms straight while putting all of your weight over the handle.  

How do I inflate my paddle board quickly? Get an inexpensive electric pump for mattress inflation sold in local retail stores. We recommend the Coleman Rechargeable pump for about $29. Use it to inflate paddle board to about 80% quickly, and then finish pumping to high pressure with provided hand pump.
How do I deflate the paddle board? Open the valve cover, press slightly on the pushpin inside the valve with your finger tip to release some air pressure, then press completely and turn the pushpin in either direction, locking it in the open position. Turn the board fins up. Start rolling the board from the rear with the fins inside the roll. You can use a rubber bungee cord to wrap around the board to keep it from unrolling.
Why is air escaping from the valve as soon as the valve adaptor is disconnected? Make sure that the pushpin inside the valve is locked in the upper position before you start pumping air into the board. When the valve push pin is in the upper position, it means that the valve is locked, and no air will escape when the valve adaptor is disengaged.
How do I know when the paddle board is fully inflated? Saturn SOT330/365 paddle boards can take up to 12-15 psi of air pressure. SUP330/365 can take up to 15psi. We suggest that you use our high-pressure electric pump that automatically shuts off once full pressure is achieved. If you use a hand pump and the air pressure gauge is available or pump until you feel the board surface become as hard as a rock. If the board is fully inflated, it will not bend under your weight when you are stand up paddling. If you are using the Sunshine board as a sit-on-top kayak, high pressure is not as important as when standing on it. Just inflate the board until it is moderately hard and does not feel soft when you press it with your fingers.
How to use the provided hand pump with gauge? Make sure you read instructions on the hand pump chamber. Apply oil to rubber seals inside pump and aluminum handle. Use double-action option to quickly fill up air chamber, then remove white plug and use single-action to finish inflation. Gauge will show air pressure on a down stroke only. If you want pressure gauge to show pressure readings continuously, then please remove rubber seal inside the valve adaptor.
My paddleboard seems to be a little bit tipsy, why? First of all make sure that paddleboard is fully inflated. Our inflatable paddleboard can take up to 12-15 psi of air pressure. While it can be achieved with a regular hand pump, our electric high pressure pump is highly recommended for quick and complete inflation.

Our company

1. Q: How does your factory do regarding quality control?

A: Quality is priority. we always attach great importance to quality controlling from the very beginning to the very end.

Our factory has gained government authentication.

2. Why I choose your company ?

1) We are China Leading inflatable boat Manufacturer.

2) Inspected by the Inspection Institution of CE Certification.

3) 100% QC inspection Before Shipment.

4) Best Quality & Best Service with Competitive price.

5) Client relationship and production management are the key factors that ensure successful China buying.