High efficiency 10KW wind turbine system price for home use
Picture for reference:
Features :
1. Active pitch + downwind, based on their own weight tracking the wind, reducing wind electronic control system to reduce the failure rate.
Mechanical pitch, to use their own weight to tracking the wind. Advantages: All of the part are mechanical structure. No electronic devices. Stable, almost no failure rate. The traditional use vane anemometer to measure the wind. By the motor and turbine. The use of electronic control systems for wind characteristics: higher wind angle accuracy, but the biggest drawback is: the electronic control system failure rate. Worm wear large. High failure rate. This is our first-generation technology, give up now .
2. low starting technique applied, start-up wind speed low to 2-2.5m/s and cut-in wind speed low to 3-3.5m/s.(Patent No.: 201020259726.4).
4. Magnetic saturation generator design, engage for the safety of generator and the 25 years lifespan of generator. (Patent No.: 201020296641.3)
5. Blade flange processed with reinforced rib increasing the intensity.
6. NSK Bearing import from Japan, lifetime up to 15 years.
7. First design of MPPT function from wind turbine to make sure the wind turbine have the rated output when the wind turbine over the rated wind speed.
8. Work under the downwind direction, using generator weight to yaw without tail.( Patent No.: 201020296658.4)
9. Mechanical pitched-control system protect wind generator work in extreme wind speed conditions. ( Patent No.: 201020296648.5)
10. Using plane balance beam technology, maintain the balance of the wind turbine(It’s been applied for patent)
Generator picture for reference:
10KW Wind Turbine Technical specifications:
Model | FD8.0-10000 |
Rated power (W) | 10000 |
Rated voltage (V) | 240 |
Rotor diameter (m) | 8 |
Start-up wind speed (m/s) | 2 |
Rated wind speed (m/s) | 12 |
Safety wind speed (m/s) | 60 |
Yawing type | Mechanical |
Rated rotating rate (r/m) | 185 |
Generator work way | Magnetic saturation |
Generator material | Steel |
Blade material | Fiber glass |
Blade quantity | 3 |
Tower height (m) | 12 |
Tower diameter (mm) | 325 |
Suggested battery capacity | 12V200AH 20pcs |
Matched inverter type | Sine wave |
10KW Wind Turbine Power Cure
10KW Wind Turbine Noise Test Report :
10KW Wind Turbine Cntroller and Protect System:
10KW Wind Turbine Controller Features:
1)Industries design standard, complete isolation design, it can endures all kinds of scurviness environment, failure rate of stable quality lower than 1%, the minimum service life can reach 5 years, 10 years designed life.(Patent No:200910213792x)
2)PWM constant-voltage charge, can protect the battery effectively. (Patent No: 200910213782.6)
3)Non-polar multi-channel unloading, can guarantee the full use of the energy. (Patent No: 200910213783.0)
4)Can set up the cut-out wind speed.
5)Original MPPT wind turbine system new function, even when the wind speed exceed the rated wind speed, the output of generator remains at the rated power. (Patent have been reported)
10KW Wind Turbine Controller Technical Specifications
Model | CO10K |
Rated Power | 10KW |
Rated DC Voltage | 240V |
Over-discharge protection voltage | 210V |
Over-discharge recovery voltage | 235V |
Over-charged protection voltage | 300V |
Over-charged recovery voltage | 290V |
Regulative voltage | 280V |
Max. charge current | 43A |
Unload current | ≤500 mA |
Cooling type | Auto cooling & fan |
Protection | Over-charge, over-discharge, unloading, manual and electronic braking, etc. |
Controller LCD Display Show :
Pitch Control System:
When the wind speed exceeds safety wind speed, mechanical pitched-control system ystem will adjust the Angle of the blade, and through aerodynamic braking mode the wind turbine safety shutdown.
How to maintain the wind generator ?
Generator doesn’t need maintenance, only need to add oil, every five years. This is the injection hole
10KW Wind Turbine Applications:
Factory
Certificate