Double LPG Sample Cylinders

The products is used for sampling, carrying and storing Ethane, Ethylene, Propane, Propylene butadiene gas or any other gas and liquid product.

Model BPY’s sample cylinder allows gas samples to be collected at pressure, assuring that the sample constituents that can change state with pressure reduction are not lost during sample collection. 

An example of this type of sample would be LPG or other two-phase fluids that could flash off sample constituents if the pressure was reduced.

Capacity:  50 ml, 100 ml, 150 ml, 250 ml, 300 ml, 500ml, 1000 ml, 2000 ml, 2500 ml, 4000 ml, 5000 ml, 10000 ml.
Working pressures up to 3000 psig(20Mpa;206bar)

Operation temperature: -40~50°C
Material: 316L stainless steel

Liquid petrolum gas sample flow chart.

The product is conforming to SH/T0233 <Sampling Method of Liquefied Petroleum Gas> and ASTM D1265.

Double LPG Sample Cylinders

 •The product is conforming to SH/T0233 <Sampling Method of Liquefied Petroleum Gas>  and ASTM D1265.

•Which are made of seamless tubing and formed by utilizing spinning process for consistent thickness, size and capacity.
•Smooth internal neck transition allows easy cleaning and eliminates trapped fluid.
•Rupture disk units protect sampling cylinders from over pressurization by venting the extra content to atmosphere.
•Internal cylinder surface can be coating with PTFE to provide a nonstick surface.

Optional Accessories.

Customers may choose the appropriate cylinder accessories  according to the requirements.

Price is calculated separately, if contract does not indicate, it will not be provided.